Gamecube PSU

ganonbanned · Post by **ganonbanned** » Sun Sep 24, 2006 6:27 pm

Hi,
How can I get the screws out of a gamecube PSU?

thanks

EnterTheHatrix · Post by **EnterTheHatrix** » Mon Sep 25, 2006 5:10 am

Same way you opened the Gamecube.

ganonbanned · Post by **ganonbanned** » Mon Sep 25, 2006 2:57 pm

EnterTheHatrix wrote:Same way you opened the Gamecube.

Im not using this for a GC

also, I didnt want to ruin the screw because I figured I would need it. I then thought I could just put a regular screw in there. but than how do I get the screw out?

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Mon Sep 25, 2006 3:08 pm

what screw are you talking about

ganonbanned · Post by **ganonbanned** » Mon Sep 25, 2006 3:50 pm

Turbo Tax 1.0 wrote:what screw are you talking about

the one to open up the PSU

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Mon Sep 25, 2006 3:56 pm

you mean the power brick that plugs into the GC, if this is for your DCp that will get you absolutely no where the GC PSU is inside the actual GC and runs off of the 12 volts that the brick supplies.

Post by **Skyone** » Mon Sep 25, 2006 4:08 pm

Yes, technically you need 120v to get 12v out of it.... wouldn't it be better to buy a regulator...?

demonofaj · Post by **demonofaj** » Mon Sep 25, 2006 4:14 pm

No, I believe he wanted to do what Dave did with his DCp (which is using a gamecube PSU). I think wants to know where to input voltage, or something among those lines.

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Mon Sep 25, 2006 5:27 pm

demonofaj wrote:No, I believe he wanted to do what Dave did with his DCp (which is using a gamecube PSU). I think wants to know where to input voltage, or something among those lines.

yes that is what i am talking about trust me, i know the guts of the GC well, there is absolutely nothing of any importance inside the GC power brick, the part he wants is clipped onto the bottom of the GC mobo, he can buy one on the internet for ~15$