Intec Gamecube

Wrath · Post by **Wrath** » Fri Sep 01, 2006 7:19 pm

Hello lovely folks. So I took it upon myself to make myself a portable N64 mainly so I'll get more use from it so I went looking around and found an Intec game cube screen for $60 (brand new) CAD, I've got it apart but realized I had no idea how to wire the thing, Any help would be appreciated and if pictures of it are needed just let me know and I'll see what I can do.

SpearMan74 · Post by **SpearMan74** » Sat Sep 02, 2006 10:05 pm

Take apart the cable that plugs into the 64 and just try to figure out which wires go to which hole on the mobo.

You'll feel a lot prouder than just following directions.

Wrath · Post by **Wrath** » Sun Sep 03, 2006 6:02 pm

that could work.. but still nto really awnsering the problem

Post by **CronoTriggerfan** » Sun Sep 03, 2006 7:23 pm

Just trace the leads back from the control board or something. Remember, multimeters are your friend!

CTFan

ShockSlayer · Post by **ShockSlayer** » Mon Sep 04, 2006 4:52 am

CronoTriggerfan wrote:Remember, multimeters are your friend!

CTFan

WRONG! It's: Multimeter tells all.

Idiot.

SS

Wrath · Post by **Wrath** » Tue Sep 05, 2006 2:22 am

ok so hereâ€™s the situation the multimeter I was going to get a loan of ended up falling through so now I'm left pretty screwed over and with no way of getting this screen working unless I get more money (which I have no way of doing) and buying my own