TV in jack pinout?

[J6103]

I have an old radioshack pocket tv(screen=2.2in) that uses the normal tv hookup plug on most pocket tv's
---
(12019667-JACK AUDIO VIDEO[-NP Part#:J90229])
---
and becase I am completely new to making actual portables, I would like to know the pinout for all of the pins on this connector(ie:the Tv/in switch and the video+audio).

Where might I obtain the pinnout information for this?

---

|On a side note(off topic), where might I obtain a DC-DC converter for 6v to 4.5v, or would I have to make the circut myself? If I need to make it myself, where might I obtain the schematics for the circut?)

[someone]

try looking at mouser.com or digikey.com for the DC-DC adapter although i would like to know why you need 4.5V but i assume your pocket tv runs on 3AAs. look on the TV at the max imput voltage. i would guess you could get away with the 4.8V you would get from 4 AAnimhs, and that could probably run the system as well, if you bypassed the 7805 that many systems have. as for the pinouts, i sadly can't help you there. good luck on your portable!!!

[diggerdanh]

http://www.classicgaming.com/vcsp/Step% ... acking.htm

go about 3/4 of the way down the screen.

Additionally...

http://benheck.com/ipw-web/bulletin/bb/ ... c.php?t=18

[HK-47]

Theres the pic...