My Portable Journey is now begun!!!!!

littlemal · Post by **littlemal** » Mon Aug 07, 2006 9:42 am

As you can see, I'm using a battleship case for a portable case, I was going to use legos, but I decided not. I'm not doing the screen mod, because I don't have a battery and I don't want to mess with the screen just yet. Any way I have a few questions.

1. How do I get Power that comes from the psone adapter to the screen?
2. If I use composite video, can I keep the speakers, headphone jack and video in jack still? Thanks Everybody!

atari2600a · Post by **atari2600a** » Mon Aug 07, 2006 9:46 am

You should at least try to get S-Video or RGB!

Battleship case, why didn't I think of that!

cowsgoquack101 · Post by **cowsgoquack101** » Mon Aug 07, 2006 10:03 am

Just as a note: you didn't need to make two topics, you just could have changed the first one.

Nice case idea though!

littlemal · Post by **littlemal** » Mon Aug 07, 2006 10:04 am

Do you know the exact pins for RGB? Like what pins go to what pins on the screen.

atari2600a · Post by **atari2600a** » Mon Aug 07, 2006 10:32 am

No, but there should be a sticky...

blackbox_dev · Post by **blackbox_dev** » Mon Aug 07, 2006 11:18 am

littlemal wrote:[As you can see, I'm using a battleship case for a portable case

IDEA STEALER!!!

Nah, just kidding. It's cool to see other people using that idea.

littlemal · Post by **littlemal** » Mon Aug 07, 2006 1:18 pm

Does anyone know how to get power from the psone motherboard to the screen board?

toby dawg · Post by **toby dawg** » Mon Aug 07, 2006 1:32 pm

yes just connect then to the same power source at once.

littlemal · Post by **littlemal** » Mon Aug 07, 2006 1:38 pm

Say I'm using the adapter as my power source, I connect 7.5 volt in and ground from the screen to the bottom of the power jack on te psone motherboard right.

toby dawg · Post by **toby dawg** » Mon Aug 07, 2006 1:51 pm

yeah, connect +7.5 volts on the psone plug to the correct spot on the screen and ground

littlemal · Post by **littlemal** » Mon Aug 07, 2006 2:22 pm

Do you know what lead on the power jack is positive and negative since there are three.

toby dawg · Post by **toby dawg** » Mon Aug 07, 2006 2:59 pm

yes yes sorry should of told you,

there are three and go like this

.....0....positive 7.5
....o o....both ground
....| |....plug goes here

littlemal · Post by **littlemal** » Mon Aug 07, 2006 3:34 pm

Ok so you plug those into these pins right here right?

littlemal · Post by **littlemal** » Mon Aug 07, 2006 7:53 pm

If When I power the screen, do I put it on the 7.5 volt metal lead and the one of the gound metal leads on the back of the pd board screen? (Just making sure so I don't fry anything)

toby dawg · Post by **toby dawg** » Mon Aug 07, 2006 9:13 pm

err....whaaa? connect 7.5 volt to the correct spot on the psone power plug where i said in my diagram and ground...sorry i dont get what your saying

benheck.com Forums

My Portable Journey is now begun!!!!!

My Portable Journey is now begun!!!!!

Re: My Portable Journey is now begun!!!!!