N64 On, Video output not...

Vanhal · Post by **Vanhal** » Fri Jul 28, 2006 3:59 am

It should be working. The power led is on but the video output is not outputing anything. Anyone?

timmeh87 · Post by **timmeh87** » Fri Jul 28, 2006 7:44 am

1) read the sticky

2) put a jumper pack in (FORWARDS). turn the system on. then put a game in (forwards!) and turn it on

3) if it still dosent work it may be fried.

atari2600a · Post by **atari2600a** » Fri Jul 28, 2006 7:48 am

It could also be the connectors for the A/V Input (as in on the cable) or Output (as in on the N64)

Plus, it could be that the connectors on the cartridge(s) simply have to be cleaned! Get some rubbing alcohol, a cloth, something small yet long & solid to put under the cloth, & polish off the connectors on all your games.

It (possibly) could be the cartridge connectors on your system too...

Vanhal · Post by **Vanhal** » Fri Jul 28, 2006 8:33 am

Jumper Pac FORWARDS...... that might be the one..... It can go both ways????

Vanhal · Post by **Vanhal** » Sat Jul 29, 2006 1:19 pm

its in the right way, led doesn't even go on when its the wrong way.

Vanhal · Post by **Vanhal** » Sun Jul 30, 2006 12:38 pm

before

Vanhal · Post by **Vanhal** » Sun Jul 30, 2006 2:10 pm

the system only seems to be drawing .75amps. Is this normal?

ShockSlayer · Post by **ShockSlayer** » Sun Jul 30, 2006 2:31 pm

I dont think so.

Vanhal · Post by **Vanhal** » Sun Jul 30, 2006 2:50 pm

yeap deff the current, pluged in the real psu and it worked fine.