Battery

Includes but not limited to: SNES, Genesis, Sega CD, PlayStation 1, Nintendo 64, Dreamcast, Game Gear and I guess the Virtual Boy.

Moderator: Moderators

Post Reply
Vanhal
Posts: 28
Joined: Fri Jun 30, 2006 11:09 am

Battery

Post by Vanhal »

Is this battery ok, i.e will it explode on me or does it have protection.
http://www.eastcoastphoto.com/nav/itemp ... temid=6104
If not does anyone know a good high mah battey that i can get relitivly cheap in europe.
demonofaj
Portablizer Extraordinaire
Posts: 2553
Joined: Tue Jun 21, 2005 2:52 pm
PSN Username: ajsen1gma
Steam ID: demonofaj
Location: NYC (718)
Contact:

Post by demonofaj »

Sir, just go to batteryspace.com, and get a rather cheap battery (euro/pounds wise I'm not too sure). Also, I doubt that battery has a protection circuit (unless you buy a proper charger) and seems expensive, and I don't see the voltage rating, anywhere.
"Life's a female of the dog species, then you die.."
Vanhal
Posts: 28
Joined: Fri Jun 30, 2006 11:09 am

Post by Vanhal »

voltage is 7.4v, scroll down, and i can get the battery for £10 off ebay
timmeh87
Senior Member
Posts: 3047
Joined: Mon Nov 14, 2005 10:19 pm
Location: Ontario, Canada

Post by timmeh87 »

probably 7.4v, probably has a protection circuit, and its not that expensive, esp. compared to batteryspace
Image

"Linux is only free if your time is worthless"
demonofaj
Portablizer Extraordinaire
Posts: 2553
Joined: Tue Jun 21, 2005 2:52 pm
PSN Username: ajsen1gma
Steam ID: demonofaj
Location: NYC (718)
Contact:

Post by demonofaj »

OH SNAHP!( :P )

Well, buy a proper charger along with it, and it's awesome.
"Life's a female of the dog species, then you die.."
Vanhal
Posts: 28
Joined: Fri Jun 30, 2006 11:09 am

Post by Vanhal »

Nice, also can i just rip the dc-dc converter out of this.
Skyone
Moderator
Posts: 6390
Joined: Tue Nov 29, 2005 8:35 pm
Location: it is a mystery
Contact:

Post by Skyone »

No, that only does 3v closest - you need 3.2v-3.3v exact.
Vanhal
Posts: 28
Joined: Fri Jun 30, 2006 11:09 am

Post by Vanhal »

I took apart my ipod car charger and there was a circut that does what i need inside it. just have to change around a few resistors. Whats the output current ment to be?
Skyone
Moderator
Posts: 6390
Joined: Tue Nov 29, 2005 8:35 pm
Location: it is a mystery
Contact:

Post by Skyone »

Up to 1A.
Vanhal
Posts: 28
Joined: Fri Jun 30, 2006 11:09 am

Post by Vanhal »

cool, just finished making my dc convertor, and it only cost me 9cent! :) Output voltage is 2.27v, That ok?
marshallh
Moderator
Posts: 2987
Joined: Sat Sep 10, 2005 2:17 pm
360 GamerTag: marshallh
Location: here and there
Contact:

Post by marshallh »

Vanhal wrote:cool, just finished making my dc convertor, and it only cost me 9cent! :) Output voltage is 2.27v, That ok?
No, it needs to be at least 3.2v for earlier motherboard revisions. Later revisions can go as low as 2.9v, but not 2.27v.
Image
Skyone
Moderator
Posts: 6390
Joined: Tue Nov 29, 2005 8:35 pm
Location: it is a mystery
Contact:

Post by Skyone »

2.27?! Are you sure you didn't mean to type 3.27?
Vanhal
Posts: 28
Joined: Fri Jun 30, 2006 11:09 am

Post by Vanhal »

yes i did mean to type 3.27 :oops:
Skyone
Moderator
Posts: 6390
Joined: Tue Nov 29, 2005 8:35 pm
Location: it is a mystery
Contact:

Post by Skyone »

Vanhal wrote:yes i did mean to type 3.27 :oops:
Then you're good to go.
Post Reply