Intec Screen Pad Problem

Super Cameraman · Post by **Super Cameraman** » Mon Jun 26, 2006 4:26 pm

Okay, here's the deal.

I'm going by this diagram:

The only problem is that my screen has one row of 8 pins.... What do I do? And where does an on/off switch come into the picture?

Thanks,
-Super

Post by **CronoTriggerfan** » Mon Jun 26, 2006 4:37 pm

Well, that diagram is for a HipGear, and you want Intec pinouts, so that may explain it! Here are those for the Intec:
Red = audio
White = audio
Yellow = video
Brown = audio/video ground
Black = V-
Orange = V+

As for the switch, anywhere that'll break the power cirucuit.

CTFan

Super Cameraman · Post by **Super Cameraman** » Mon Jun 26, 2006 5:05 pm

Oh, forgot to tell, I already used that pinout. It works. I figured out that I broke the NOAC.... great. Any suggestions to check if I really killed the NOAC?

-Super

Post by **CronoTriggerfan** » Mon Jun 26, 2006 9:14 pm

Plug it into the wall outlet. You'll have to resolder all the leads to the controller board, though.

CTFan

Super Cameraman · Post by **Super Cameraman** » Tue Jun 27, 2006 11:01 am

Uh... I might try that, but back ontopic:

A question, not having to do with anything specific. Is touching anypart of a circuit board that isn't a solder lead with a hot soldering iron bad?

-Super

EDIT: Forgot to add, the wires connecting the adjustment board thing and the screen mobo broke.... so I'm fixing that. Hopefully it will work.

Super Cameraman · Post by **Super Cameraman** » Tue Jun 27, 2006 3:17 pm

Okay, resoldering ribbon cables are hard... any tips? Should the leads on the wires be long or short?

-Super

Super Cameraman · Post by **Super Cameraman** » Wed Jun 28, 2006 11:29 am

Okay, everything is resoldered and it won't turn on now.

I think the problem might be that I soldered the wrong wires to the wrong leads, but there are 7 wires and 8 leads.... Help!!

-Super

Super Cameraman · Post by **Super Cameraman** » Wed Jun 28, 2006 1:55 pm

A question: What is the maximum number of AA's that I can use? Because my 4 AA pack.. kinda... melted...

-Super

Super Cameraman · Post by **Super Cameraman** » Thu Jun 29, 2006 8:32 am

This is getting ridiculous. WHY WON'T ANYONE POST!?

-Super

Super Cameraman · Post by **Super Cameraman** » Fri Jun 30, 2006 9:25 am

Are you kidding me? NOBODY AT ALL!?

Super Cameraman · Post by **Super Cameraman** » Sat Jul 01, 2006 10:28 am

Well since no one wants to help, I'm throwing this screen away and buying a new one.

-Super

Super Cameraman · Post by **Super Cameraman** » Sat Jul 22, 2006 11:58 am

Okay, I bumped this because I have a question. If I wire the left audio to both the left and right wire, will I get the left audio out of both the left and right speaker, or will I fry it?

-Super