charger

Do you have a technical question that doesn't really fit a specific console? Want some general info on electronics, hacking, making cookies, etc? Here's the place to ask! Go nuts.

Moderator: Moderators

Post Reply
RAZMATIC
Posts: 52
Joined: Wed Jun 29, 2005 2:47 pm
Location: westside

charger

Post by RAZMATIC »

i just wanted to know is there a way to charge two rc batterys at the same time with one charger.
vskid
Senior Member
Posts: 6314
Joined: Fri Mar 25, 2005 8:25 am
Steam ID: vskid3

Re: charger

Post by vskid »

RAZMATIC wrote:i just wanted to know is there a way to charge two rc batterys at the same time with one charger.
You'll have to do some chopping, just wire them in parallel, it will take twice as long. Wait for a second opinion, though, because I'm not positive.
Image
daguuy
Portablizer
Posts: 3666
Joined: Fri Apr 01, 2005 7:09 pm
Location: missoura

Post by daguuy »

yeah, just put them in parrallel and it should charge fine but half as fast.
ImageImage
RAZMATIC
Posts: 52
Joined: Wed Jun 29, 2005 2:47 pm
Location: westside

Post by RAZMATIC »

what would be the best way to hook up two 7.2 rc battery up to a gamecube.
and i dont have the 7.2 rc battery charger to it. please help
vskid
Senior Member
Posts: 6314
Joined: Fri Mar 25, 2005 8:25 am
Steam ID: vskid3

Post by vskid »

RAZMATIC wrote:what would be the best way to hook up two 7.2 rc battery up to a gamecube.
and i dont have the 7.2 rc battery charger to it. please help
Doesn't the GC need 12v? So you would need to put them in series, but I don't know if 14.4v is too much.
Image
RAZMATIC
Posts: 52
Joined: Wed Jun 29, 2005 2:47 pm
Location: westside

Post by RAZMATIC »

14.4 is fine but how would i charger it
vskid
Senior Member
Posts: 6314
Joined: Fri Mar 25, 2005 8:25 am
Steam ID: vskid3

Post by vskid »

RAZMATIC wrote:14.4 is fine but how would i charger it
Without a charger for the batteries, it is kind of risky to charge. You can just hook it up to a 12v power adapter (one at a time) and divide the battery capacity by the charger amp output to find out how many hours to leave it on (I think about .5 amps is good for the wall adapter). 7.2v batteries get to about 8.4v (I think) when charged, so you have to consider that, too.
Image
RAZMATIC
Posts: 52
Joined: Wed Jun 29, 2005 2:47 pm
Location: westside

Post by RAZMATIC »

can someone make me a picture how its sould be
timmeh87
Senior Member
Posts: 3047
Joined: Mon Nov 14, 2005 10:19 pm
Location: Ontario, Canada

Post by timmeh87 »

discharging batteries in parallel is 'not reccomended' without some careful thought and/or circutry, they will charge each other, and probably oscillate in that manner.

however, when you are charging batteries its probably fine. as far as i know (never really studied mine), most AA nimh battery chargers charge in parallel, as well, the solarcar has 108 battereis, 27 in series with groups of 4 in parallel. the whole thing is charged as a unit with one massive power supply, and nobody seems concerned about it. (these are lithium polymer batteries too).

im not exactly sure about the exact science of the matter, im just citing some observations that i have made
Image

"Linux is only free if your time is worthless"
Metroid fan
Senior Member
Posts: 2158
Joined: Fri Apr 15, 2005 2:36 pm
Location: Somewhere in the universe
Contact:

Post by Metroid fan »

GC needs 12 volts just so you know and if you get anything get some Li-polys with protection circuit or better yet just buy the GC battery...
Post Reply