FS: DC-DC 200W Power Converter mini-ITX - PW200M

Looking for a special part, or have extra stuff you don't need? Trade, sell and buy it here. (Note: Transactions are not monitored by benheck.com)

Moderator: Moderators

Post Reply
Bay_Wolf
Senior Member
Posts: 581
Joined: Sun Oct 09, 2005 1:32 pm
Location: Farm Town

FS: DC-DC 200W Power Converter mini-ITX - PW200M

Post by Bay_Wolf »

PRICE= $50 Plus Shipping ALSO INCLUDES THE POWER BRICK

The PW200M is a small yet powerful and fully compliant ATX power supply, designed to power a wide variety of standard PCs from a single 12V power source.

The PW200M is the only cable-less mini-ITX power supply solution. Compatible with an entire range of mini-ITX motherboards as well as regular boards, the PW200M provides cool, silent power for your system.

PW200M Advantages:
• 100% silent operation
• Low heat dissipation with efficiency over 95%
• Low RFI/RMI and low ripple noise
• Plugs directly into the motherboard's power connector, no cable mess
• Long life (MTBF rated at >200,000 hours)

Specifications
Max Power Output: 205 Watt
• 5V (+/-5%): 6A Max / 10A Peak
• 5VSB (+/-5%): 2A Max / 10A Peak
• 3.3V (+/-5%): 6A Max / 10A Peak
• -12V (+/-10%): 0.1A Max / 0.2A Peak
• 12 Volt (Unregulated): 12A Max / 13.5A Peak

Fits the VIA EPIA M, ML and MII motherboards . It includes 2x Full Size HDD power connector and 1x floppy power connector. To power a P4 motherboard, you'll need an ATX extension cable and P4 power adapter cable.

Image
Image
Image
Image
SgtBowhack
Posts: 831
Joined: Wed Dec 08, 2004 5:16 am
Location: Chicago, USA

Post by SgtBowhack »

It's no more cable-less than the picoPSU.
What sort of power brick do you have? The power supply could be 200W, but if the power brick can't supply 200W, it's not gonna be 200W. Can you post the voltage and amperage on the brick? Might be interested...
Bay_Wolf
Senior Member
Posts: 581
Joined: Sun Oct 09, 2005 1:32 pm
Location: Farm Town

Post by Bay_Wolf »

Image
AC-DC 12 V, 9A Switching Power Adapter (110/220V)

* Recommended for P4s
* Power adapter for all Micro Power Supplies
* INPUT:100-240V AC
* OUTPUT:12V 9A 110W Max
* IEC 320-C14
* Receptacle 3P
* Power Cord included
* 5mm/2.5mm barrel power jack
* Compatible with all of our DC-DC Power Supplies
* Polarity: Center pin positive(+)

Dimensions: 6.6"x2.3"x1.3" (16.76cm x 5.8cm x 3.3cm)

Weight (including cord): 2.0 lb (.68 kg)
Bay_Wolf
Senior Member
Posts: 581
Joined: Sun Oct 09, 2005 1:32 pm
Location: Farm Town

Post by Bay_Wolf »

If no Offers or Buyers by Sunday. I will put it on ebay and post link here.
SgtBowhack
Posts: 831
Joined: Wed Dec 08, 2004 5:16 am
Location: Chicago, USA

Post by SgtBowhack »

That's not bad. 108W brick is a bottleneck, but as far as 12V supplies go, 108W is pretty good.
Post Reply