Intec lcd (can you remove the interface board)

Warrior_Rocker · Post by **Warrior_Rocker** » Fri Apr 14, 2006 7:02 am

Already having removed the blue wire from the lcd and tie-ing in the lcd's power directly to the dc input to the device, save the ground there are only 4 other wires going to the back of this lcd, is there any way to get rid of the interface board altogether, is it taking rgb into the lcd or how does this work, anyone got any ideas, one thing i did notice is that when some wires are unplugged it gets wavy and fuzzy, leading me to belive that some wire must be a sync of some kind? anyone got any ideas?

Warrior_Rocker · Post by **Warrior_Rocker** » Fri Apr 14, 2006 12:18 pm

Ok, So here is what i have found out about this lcd, yes it does take rgb in from what ive seen so far, the (pink, white, and yellow) wires going to the lcd are RGB respectively, and the green wire is for sync

NEXT i need to know if anyone knows how to a) make a simple composite signal splitter, or take rgb off of the n64 itself, as this will save tons of power by bypassing the daughter board of this stupid lcd... and probably give a better picture

vb_master · Post by **vb_master** » Fri Apr 14, 2006 12:26 pm

N64 RGB mod.

Warrior_Rocker · Post by **Warrior_Rocker** » Fri Apr 14, 2006 1:25 pm

not a chance, not only do i think that is a pal based n64 (not that it really has bearing on rgb output, but pcb layout is really different) but thats one of the original boards, i have a v9 board, with no such chip in any such location as that one....

timmeh87 · Post by **timmeh87** » Fri Apr 14, 2006 2:02 pm

well if youre not using rbg like that, then just use s-video or composite.

vb_master · Post by **vb_master** » Fri Apr 14, 2006 4:26 pm

Warrior_Rocker wrote:pal based n64

Obviously it isn't if you would of read.

gamesx.com wrote:Note! This mod does not work on PAL N64 units! We are trying to find out why, but so far no luck. Perform the mod at your own risk, and if you manage to find the right method for RGB output on a PAL N64, please let us know!

Warrior_Rocker · Post by **Warrior_Rocker** » Sat Apr 15, 2006 6:39 am

ok, dont be mean mr, i mispoke my bad dang, and my version of the n64 does not have that particular chip, nor does it have the traces comming off of the video chip... and I was really asking if anyone had done this themselves on a recent n64, and if it was possible,

either you help, or you dont... its that simple