Oh No?!

Sword_Gun · Post by **Sword_Gun** » Tue Apr 11, 2006 5:22 pm

Why not use the cold heat?

gamer2 · Post by **gamer2** » Tue Apr 11, 2006 5:34 pm

Da cold heat sucks worse than intellevision

Sword_Gun · Post by **Sword_Gun** » Tue Apr 11, 2006 5:36 pm

Intellevision = ROCKED

gamer2 · Post by **gamer2** » Tue Apr 11, 2006 5:45 pm

He is a Witch!, A witch.

He Turned me into a Newt!

Harshboy · Post by **Harshboy** » Tue Apr 11, 2006 5:49 pm

ok, Cold Heat iron sucks worse than Bush

S q u e e ! · Post by **S q u e e !** » Tue Apr 11, 2006 5:51 pm

Now that is uncalled for! Even though I might not agree with all of his actions, that is a bad comment.

**EDIT**

Rule #4:

The Rules wrote:4. No politics/religion. This one comes straight from Ben himself. This stuff has different opinions, which leads to fights, which leads to not good stuff.

gamer2 · Post by **gamer2** » Tue Apr 11, 2006 5:52 pm

No politics on the forum Harshboy, The cold Heat soldering iron sucks a worse idea than greedo shooting first.

Sword_Gun · Post by **Sword_Gun** » Tue Apr 11, 2006 5:55 pm

Bush... But Im canadian You see.

and what makes the Cold heat SOOO bad?

joevennix · Post by **joevennix** » Tue Apr 11, 2006 6:31 pm

It's not meant for electronics. From what I've gathered, it works like this: when you touch solder to its tip, it complete's the iron's circuit, and a huge amount of voltage is sent through the tip, creating instant high temperature, and melting the solder.

However, if you use this on your electronics projects, you're likely to fry something by randomly sending huge amounts of voltage through it from its solder joints.

So don't use it.

blackbox_dev · Post by **blackbox_dev** » Tue Apr 11, 2006 6:39 pm

I've been thinking about that, BUT! If you are soldering to one little contact, the electricity is going to be going between one side of the contact to the other. If your careful not to bridge anything, shouldn't it not fry shiz (as someone once said around the time I joined).

Picture:

However if your clumsy I'm sure you could fry stuff like this:

Post by **SpongeBuell** » Tue Apr 11, 2006 6:45 pm

Please post NES related stuff in the NES forums (yes, NOAC is included)

Also, be careful about your bumpings, 1 hour is way to early. (24 hours, if you really need one)

Sword_Gun · Post by **Sword_Gun** » Wed Apr 12, 2006 4:08 pm

Hey, is it Possible to Solder the wires directly to the contacts? (The contacts are on the Bottom of the Circut Board)

Post by **Skyone** » Wed Apr 12, 2006 4:10 pm

Of course, they're vias.

Sword_Gun · Post by **Sword_Gun** » Wed Apr 12, 2006 5:13 pm

Will I need any special wire since the old wire was usedn to connect the AV board to the Main Board?

Post by **Skyone** » Wed Apr 12, 2006 5:16 pm

Nope, any wire works.