I am one naughty little donkey...

demonofaj · Post by **demonofaj** » Thu Mar 23, 2006 4:23 pm

I am succumbing to the fumes of my iron, or I ate some bad shrimp...but an idea came...I finished my other NOAC, and am working on another one (the one I finished needs a case...fooey for now). I'm using a PSONE screen, and am wondering for the 5 volt thing. Can I solder a wire from the output of the PSONE screen 7805 and put that in the VCC of the NOAC, I'll power the battery via...PSONE screen, with a switch of course. Will it work?

blackbox_dev · Post by **blackbox_dev** » Thu Mar 23, 2006 5:00 pm

Yes, you can take the output of me inside the PSOne screen into the 5v input of an NOAC, as long as I am able to supply enough voltage. I'm not sure what your talking about with the second part "power the battery via the PSOne screen"

. But from the parts I understood, it will work.

demonofaj · Post by **demonofaj** » Thu Mar 23, 2006 5:53 pm

Ooooh, I am gonna touch your central and right prong tonight

blackbox_dev · Post by **blackbox_dev** » Fri Mar 24, 2006 7:15 pm

Oooh! That feels good!

By the way, in the post above I said supply enough voltage but I meant amperage.

demonofaj · Post by **demonofaj** » Fri Mar 24, 2006 9:15 pm

2300 mA/h