Can anyone with a yobop done check mine out?

Klefmung · Post by **Klefmung** » Sat Mar 18, 2006 10:59 am

No digital camera reader, so no pics. I need to send it to someone. I connected the ground in three places, hooked in the video in the wire and at the solder point on the mobo, and it still refuses to work. Can someone help here?

scherubino · Post by **scherubino** » Sun Mar 19, 2006 9:56 pm

Here's the diagram I sent Crono. See if this helps.

Also did you do the LED mod on the screen?

Klefmung · Post by **Klefmung** » Sun Mar 19, 2006 10:27 pm

nah, I didn't. But I hadn't run it off of batteries (still need some things for my adjustable regulator circuit), so I thought that wall power would be sufficient. Woult it not? Oh, and I am just using the main board.

scherubino · Post by **scherubino** » Sun Mar 19, 2006 10:41 pm

if the original circuitry of the psone screen is still in tact you should be able to power it from the wall with the original adapterit came with.

As for the yobo board, you can follow the leads on the A/V board to the main board to see where they end up and still use the diagram I attached. I kept the AV board because of the power regulator on it - I input my unregulated power into it to power the yobo.

Klefmung · Post by **Klefmung** » Sun Mar 19, 2006 10:47 pm

I use the 7805 in the Screen.