Damn Pirates!

demonofaj · Post by **demonofaj** » Sat Mar 18, 2006 7:41 pm

So I cut the power player plug to attach to my RC connector. I attaced the wire with a gray strip to Neg and the one with a black plain wire to pos. Then I tried that connector with 7.2 V. on my intec screen. Some small fire burst in the screen and the video works but the audio is dead. Did I wire anything wrong?

JackFrost22 · Post by **JackFrost22** » Sat Mar 18, 2006 7:50 pm

I think that Universely Black and Green mean ground so I think you wired it backwards.

demonofaj · Post by **demonofaj** » Sat Mar 18, 2006 7:51 pm

...are you sure...both wires are the same black, and one just has some white line through it...

And about the audio problem?

Kurt_ · Post by **Kurt_** » Sat Mar 18, 2006 8:16 pm

Fried the Audio IC?

Post by **Gamelver** » Sat Mar 18, 2006 8:18 pm

the wire with the white line is negative.

demonofaj · Post by **demonofaj** » Sat Mar 18, 2006 8:42 pm

OK, and yes, I do think I fried the Audio AC, a nesp with no audio

bioniclebert · Post by **bioniclebert** » Sat Mar 18, 2006 8:55 pm

Im assuming by pirates you mean a famiclone?
If so, without a 7805, you fried the pirate.

demonofaj · Post by **demonofaj** » Sun Mar 19, 2006 1:54 pm

That's weird because on the AC-DC adaptor that came with the famiclone said quote "Output: 9V.", and uh...yea.

jeep · Post by **jeep** » Sun Mar 19, 2006 2:50 pm

Yeah, but I guess there is a 7805 just after the adapter plug....