Includes but not limited to: SNES, Genesis, Sega CD, PlayStation 1, Nintendo 64, Dreamcast, Game Gear and I guess the Virtual Boy.
Moderator: Moderators
demonofaj
Portablizer Extraordinaire
Posts: 2553 Joined: Tue Jun 21, 2005 2:52 pmPSN Username: ajsen1gmaSteam ID: demonofajLocation: NYC (718)
Contact:
Post
by demonofaj Sun Feb 19, 2006 3:13 pm
On desoldering out the Video/Audio Jack on the Genny 2, there are BIG ground pins...how do I desolder them to unhook out the jack?
"Life's a female of the dog species, then you die.."
demonofaj
Portablizer Extraordinaire
Posts: 2553 Joined: Tue Jun 21, 2005 2:52 pmPSN Username: ajsen1gmaSteam ID: demonofajLocation: NYC (718)
Contact:
Post
by demonofaj Mon Feb 20, 2006 7:57 pm
Big Bumping Bump!
"Life's a female of the dog species, then you die.."
Fanboy
Posts: 785 Joined: Mon Jan 23, 2006 7:00 pmLocation: Philadelphia, PA
Post
by Fanboy Mon Feb 20, 2006 8:00 pm
Desolder it in sections and then push it out with your soldering iron
. Works every time!
God Bless Hot Glue
daguuy
Portablizer
Posts: 3666 Joined: Fri Apr 01, 2005 7:09 pmLocation: missoura
Post
by daguuy Mon Feb 20, 2006 8:36 pm
that should work. if it doesn't get it completely off, use a desoldering braid
demonofaj
Portablizer Extraordinaire
Posts: 2553 Joined: Tue Jun 21, 2005 2:52 pmPSN Username: ajsen1gmaSteam ID: demonofajLocation: NYC (718)
Contact:
Post
by demonofaj Thu Feb 23, 2006 8:31 pm
Hmmm, the problem is that there are 4 HUGE prongs in all, maybe Gabe (G-Force for me) can lend a hand. That's his cue
"Life's a female of the dog species, then you die.."
loup
Posts: 303 Joined: Mon May 23, 2005 4:13 pm
Post
by loup Thu Feb 23, 2006 8:40 pm
get a solder sucker, a solder bulb will work. Heat up the solder till it melts, with the iron still in the solder, use the sucker to suck out the solder. Should remove the solder quite quickly
From the OLD ozforces forums
. Works every time!
