Aaah! confuzing

geekbait111 · Post by **geekbait111** » Sat Feb 18, 2006 8:19 am

Alright, at first I thought I had to solder the input/output to somewhere like G-Force's ondago (a.k.a the back of the gen. 3 where the ground stuff is). But today I read http://benheck.com/phpBB/viewtopic.php?t=7846 and now I'm all confuzed about the 7805 regulator. Can someone tell me what I would plug into the input,output, and ground? And then would I use the Power ground still, or not use it?

Post by **Skyone** » Sat Feb 18, 2006 3:35 pm

Pretend the area that says 7805 is the gray/black area on the 7805 regulator.

All you have to do is throw anywhere from 7.2 volts to 32 volts onto the input voltage, and the negative/ground of the battery onto the ground of the 7805.

That's it!

EDIT: Hey! That's my thread you found!

geekbait111 · Post by **geekbait111** » Sat Feb 18, 2006 4:15 pm

ooh yay that's simple. do you solder anything to the output like the screen perhaps or do you leave the output alone?

Post by **Skyone** » Sat Feb 18, 2006 4:16 pm

You only have to solder the output to a screen if the screen needs exactly 5 volts. Otherwise, just solder the amount of batteries the screen needs to the screen.

Besides that, it's as simple as that!

geekbait111 · Post by **geekbait111** » Sat Feb 18, 2006 4:17 pm

Do you know if the (intec) PSone screen takes up that amount

Post by **Skyone** » Sat Feb 18, 2006 4:28 pm

Sorry for not responding to your AIM, I was making popcorn

.

Anywho, I'm not sure how much it takes in, but it'd be wise to test it with a multimeter. Ask, if you need help.

geekbait111 · Post by **geekbait111** » Sat Feb 18, 2006 5:23 pm

popcorn