Intec controller pad screen

[Neildo_64]

Yeah, as far as posting here, I'm pretty much a n00b, but as far as doing things like this (soldering, electronics, blah blah), I'm not. Also, I'm actually a pretty active reader here. I just never usually post anything.

Anyways, I was wondering if anyone has a pinout of the Intec controller screen. I've searched the forums, but I'm having a hard time finding one. If not, I spose I could trace them, but thanx in advance.

[joevennix]

Here ya go.

1. N/C
2. Adjust ground (grey)
3. common with 2 (grey)
4. common with 2 (grey)
5. N/C
6. N/C
7. Brightness adjust (blue)
8. Contrast adjust (yellow)
9. Color adjust (white)
10. Adjust power +5V (purple)
11. Composite video in (yellow)
12. Video ground (brown) N/C
13. Power ground (black)
14. Power (red)

Shamelessly copied and pasted from LadyAda's GameGrrl page. Anyways, there it is.

[Neildo_64]

thank you very much

[Neildo_64]

Okay, now I guess I have a couple more questions.

Can the screen be used without the actual controller portion?

and

What, if any, are the differences between the US ones and the Canadian ones?

[demonofaj]

US and Canada are the same (NTSC) and I'm pretty sure you don't need the actual Controller part of the board.

[Neildo_64]

once again, thanks.
I just got my intec pad in the mail today. BRAND NEW. I almost feel bad for wanting to rip it apart, but that IS why I bought it, so I guess I'll just have to force myself

Edit: Actually, that is the pinout for a hipgear. The Intec screen only has six wires coming from the screen to the controller.

Edit:

here are the wires for the intec screen pad

red = audio
white = audio
yellow = video
brown = audio/video ground
black = V-
orange = V+

Ah ha! I found it. Thanks for your help anyway.