Has this happened to anyone else.

If you're making a portable you probably need something to watch it on. (Unless you want to guess what's happening in the game, but I wouldn't advise that) Anyway, this forum is your "Hacking a pocket TV/screen" one-stop solution. Share your experiences and knowledge here.

Moderator: Moderators

Post Reply
jeffslot
Portablizer Extraordinaire
Posts: 853
Joined: Wed Jun 01, 2005 6:26 am
Location: PA
Contact:
Contact jeffslot

Has this happened to anyone else.

Post by jeffslot »

Hi guys,

Just curious if anyone else has had this happen to their psone screen & if it is toast or fixable?

My Slot 1 Pin 1 (+7.5) line exploded/burned up. I'm just trying to guage the damage done to this psone screen. Do I need to jump a fuse? Can I just use the spot on the back instead? Thanks guys.

(I think my next post will be # 200, I try really hard not make uneccessary posts)
Jeff S
Top
Harshboy
Portablizer
Posts: 3610
Joined: Tue Oct 11, 2005 3:44 pm

Post by Harshboy »

Well, the whole screen could be fried...but if you want try the spot on the back of the Screen's PCB and solder the red wire on there...and solder the black wire to gnd 1 or any other ground spot.
Top
Post Reply

Return to “Portable Screen Hacking”