I'm a newb and I was wondering...

edwood777 · Post by **edwood777** » Fri Nov 25, 2005 7:44 am

How do you hook up a screen to a system. I'm so confused.

Lucretius · Post by **Lucretius** » Fri Nov 25, 2005 7:45 am

What screen and what system are you using?

Peace and details

cowsgoquack101 · Post by **cowsgoquack101** » Fri Nov 25, 2005 10:18 am

If it's a PSone screen to a PS1 no knowledge required. But hooking other screens up you'll have to connect the video and audio to ground and etc.

daguuy · Post by **daguuy** » Fri Nov 25, 2005 11:05 am

cowsgoquack101 wrote:connect the video and audio to ground and etc.

that'll most likely kill it. and edwood777, we need details to help

demonofaj · Post by **demonofaj** » Fri Nov 25, 2005 12:02 pm

Ah...a question I bugged soundwave about so much. Basically, if you find a composite video out line, use a wire to connect that line to the video in line on your screen. Same with Left and Right Audio, just connect with wire. Then find a ground spot on both system and screen and connect that with wire. And you're good to go.

Post by **Gamelver** » Fri Nov 25, 2005 2:21 pm

also, make sure you've got 7.5V to the screen, and whatever voltage needed for the system you're using. check the sticky in this forum for the pinout of the screen.