benheck.com Forums

I'm in the process of rewireing the cart slot and realized the 64 adapter has 48 pins. 11 a space then 13 in 2 rows. the motherboard has 25 solder points... Do i just skip that one?

I;m having a bit of diffulcty rewireing the contr back together. there so close together one the central contr mb. what's the best way? I've tried soldering wire right to the top of the circut board but it's very fragil and doesn't hold a good connection. I thought about drilling through the board ...

what? the female end is to the charger. The batteries i have only have a negative and positive wire coming out. I would have to hack off the male end of my nimh batterie pack and wire it to the batteries. Can i do that considering it's a plug for a nimh batterie and not a lipo? also can i charge ...

the batteries have pcbs pre wired into them. i have a charger with the metal clamps. I do have another battery pack with a plastic male end, and my smart charger has an attachment for a female end. would i be able to hack off the male end of the other battery pack and integrate it into my lipos?

so i have 2 3.7v li po batteries that both have pcbs prewired on then i also have a dpdt switch. I'm just wondering if anyone has any ideas about how to wire it without having to take the thing apart and charge them. I got the batteries through batteriespace.com and it came with a warning sheet ...

i've been looking at batteryspace and some of the batteries are already prewired with a pcb, at that point i should be able to just twist the wires together and solder it to my power switch.

I have a smart charger so i don't think that'll be a problem. I have a battery pack already but it's real heavy so i was going to look into something smaller or lighter. not quite sure what i'm going with yet though. thanks for the info guys.

Also can anyone sugest a good pcb to help prevent overcharging?

What is a good mah lvl to have for an n64p. what is the max mah you should have? Thanks for any help.

that's what i figured i'd do, but another question is how do i recharge it without having to take it apart and pull the battery? I am assuming if i just splice in the connector to the battery pack and plug it into a charger into the wall, it'll probably explode my n64p. what do i do about this?

I've been looking at harshboys complete wiring diagram and i can't figure out on it there the power switch comes into play. any help would be, well, helpfull.

5.3" x 1.8" x 0.9"

thoes are the deminsions, i don't think that too huge... or is it?

so i'm looking into batteries for an n64p and i found this on ebay today and was wondering if this would work. 2 Premium 7.2V 4500 NiMH Batteries + Smart Charger. could i use both batteries or should i only use one? save the other for a 2nd portable? thanks

NEW Zenith LCD TV FLAT Display GAME SCREEN for Gamecube

it's on ebay right now. i'd go with a ps1 screen but there $60.

I know this is a long shot but i figured it can't hurt. I am looking for a complete copy of Atlantis for the Odyssey 2 system. I have paypal. Name your price. If i think it's crazy high i'll counter. please let me know, thanks.