How can i fit a SuperJoy 3 inside a GBO case?

cowsgoquack101 · Post by **cowsgoquack101** » Thu Aug 04, 2005 9:28 am

I'm working on a portable NOACp and i'm having trouble fitting the superjoy 3 in the case. I'm afraid of hacking up my sperjoy but i want to build this any help would be highly appreciated

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Thu Aug 04, 2005 9:39 am

the super joy will fit in a GBO easily but you may have to wire the 72 pin cart slot to the NOAC instead of using a converter

if by any chance G-force reads this i would like to know how he wired his cart slot on

o yeah and if you cant get it to fit you can take off the part with the controller and wire it like this http://benheck.com/phpBB/viewtopic.php? ... sc&start=0

bioniclebert · Post by **bioniclebert** » Thu Aug 04, 2005 11:02 am

Cut off the excess plastic around the cart port, or de solder it and wire your own. Then it fits quite well inside. The NES buttons also fit, except the rubber parts (Including start and select) Then you have to cut up the controller board, or use the gameboy one that was in the original gameboy.

Reploid Ayla · Post by **Reploid Ayla** » Thu Aug 04, 2005 11:33 am

Would a radica fit inside a GBO case?

G-force · Post by **G-force** » Thu Aug 04, 2005 4:12 pm

Turbo Tax 1.0 wrote:the super joy will fit in a GBO easily but you may have to wire the 72 pin cart slot to the NOAC instead of using a converter

if by any chance G-force reads this i would like to know how he wired his cart slot on

Pretty much I just cut off the NES connector from a Family Converter and then wired it to the Super Joy 3 using the Family Converter as a wiring guide

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Thu Aug 04, 2005 4:43 pm

could you help me out by telling me wat pins go where or is it the same as the chart on gannons site because he said he never tested that chart

bioniclebert · Post by **bioniclebert** » Thu Aug 04, 2005 5:44 pm

Just find a Newer NES cart without the middle pins. Then count how many pins there are, and where they are missing. I believe that should work.

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Thu Aug 04, 2005 5:51 pm

its harder than that i think some of the pins should go to more than one pin and some pins go to different pins

like they are all mixed up in some areas

cowsgoquack101 · Post by **cowsgoquack101** » Thu Aug 04, 2005 6:41 pm

ok ty i need all the help i can get i also need a hipgear screnn lol but i worry about that as i progress...Onward into the field of portable gaming!!!!!.......HAAZZAAAA

cowsgoquack101 · Post by **cowsgoquack101** » Fri Aug 05, 2005 2:41 pm

ok more help i need...Do I have to Have the controller portion of the SuperJoy 3 or can i just use the NES connector side? Much help i need it will be appreciated

usbcd36 · Post by **usbcd36** » Fri Aug 05, 2005 2:55 pm

You can toss the Super Joy control board, the pinouts for it to use a NES controller are here on the site. Check one of G-Force's threads, I believe.

cowsgoquack101 · Post by **cowsgoquack101** » Fri Aug 05, 2005 3:23 pm

okee dokee

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Fri Aug 05, 2005 3:36 pm

i posted them in my first post for the people who cant find it

Metroid fan · Post by **Metroid fan** » Fri Aug 05, 2005 3:47 pm

Triple post [darth vader] NOOOOOOOOOOOOOOOOOOOOOO!!!![/darth vader voice]

bioniclebert · Post by **bioniclebert** » Fri Aug 05, 2005 4:06 pm

Remember, your controller has to go through the glop top first! dont throw that part out!