Ps1 screen question

If you're making a portable you probably need something to watch it on. (Unless you want to guess what's happening in the game, but I wouldn't advise that) Anyway, this forum is your "Hacking a pocket TV/screen" one-stop solution. Share your experiences and knowledge here.

Moderator: Moderators

Post Reply
exp0wnster
Posts: 16
Joined: Sat Dec 05, 2009 11:28 am

Ps1 screen question

Post by exp0wnster »

I am using a pico psu, I am going to convert the 12v to 8v with a 7808. Would I need to use electrolytic capacitors?

Thanks,

-exp0wnster
_______________________________________________________________________________________

Or you can turn on a soldering iron and start stabbing motherboards repeatedly until something lights up.
Top
limpport
Senior Member
Posts: 1873
Joined: Sun Jan 29, 2006 12:32 pm
Location: (the only person here from) Vermont
Contact:
Contact limpport

Re: Ps1 screen question

Post by limpport »

Nope. It will work just fine. You'll probably want a heatsink for it though.
Top
exp0wnster
Posts: 16
Joined: Sat Dec 05, 2009 11:28 am

Re: Ps1 screen question

Post by exp0wnster »

thanks, I'll have to make a heatsink
_______________________________________________________________________________________

Or you can turn on a soldering iron and start stabbing motherboards repeatedly until something lights up.
Top
Post Reply

Return to “Portable Screen Hacking”