NEED HELP RECONNECTING SCREEN!!!!

[andrewdorsey]

So I bought a ps2 screen (intec)

and I took it apart and everything. But when I went to reconnect everything, I realized that I didn't remember where to put the wires!?!?

There are only 4 wires I need help with.


And this is where the wires need to be connected to.


I KNOW THIS IS VERY HARD TO FIGURE OUT, BUT i have tried everything and desperately need your help!

[jaron4103]

did you ever find a pin out of your screen..iv got the same problem

[Haunted360]

Look at the two board. See if you can figure out what pin goes where. May it be voltage, and ground. That is less 2 wires to deal with. Ground is the EASIEST to find because it is usually the MAIN part of the PCB. It is a solid copper line all around the board, at screw posts etc...

You have to try and figure out the links. IE: follow the traces...


Good luck!

[Snow_Cat]

Could you post a pic using a macro or a flatbed scanner?

The screen printing on the board may help us figure it out.