If you're making a portable you probably need something to watch it on. (Unless you want to guess what's happening in the game, but I wouldn't advise that) Anyway, this forum is your "Hacking a pocket TV/screen" one-stop solution. Share your experiences and knowledge here.
Hey, I'm looking at this Casio TV-470 and trying to figure out which pins can wire up the LCD for power and display.
On the ribbon cable from the power/tuner board I see:
GND
VCC1
VCC7
6 (Thats all it says is 6)
VCC2
VCC6
VEE1
I/O
MODE
AFT
B
G
R
BU
H/L
TU
HDB2
C-Sync
I'd try to take a picture but my scanner wants to only focus on the labels on the chips and make everything else blurry and my camera doesn't seem to know what focus is.
ground is ground obviously. I would power it on and check the VCC lines carefully and see what is going on with the voltage on those lines. you can use RGB + Csync for video input it looks like.
bgnome wrote:ground is ground obviously. I would power it on and check the VCC lines carefully and see what is going on with the voltage on those lines. you can use RGB + Csync for video input it looks like.