Help putting av ports on genesis 2

genrox · Post by **genrox** » Thu Aug 03, 2006 11:42 am

could somebody please tell me how to put rca on a genesis 2?

Post by **Sparkfist** » Thu Aug 03, 2006 2:50 pm

First go to Gamesx.com, after you get the A/V pinout for the Genesis you can desolder the A/V plug. Solder the wires to some female RCA plugs (RadioShack). Chek to see you connected them right. Once it's all correct you can cut/carve holes for the RCA plugs to stick out of.

This should get you through most of it. If you have any problems through the process please include a picture to help us.

daguuy · Post by **daguuy** » Thu Aug 03, 2006 4:07 pm

this covers where to connect them on the mobo

genrox · Post by **genrox** » Thu Aug 03, 2006 8:29 pm

thanks for the help and do i have to unsolder the av out port?

Post by **Skyone** » Thu Aug 03, 2006 8:31 pm

genrox wrote:thanks for the help and do i have to unsolder the av out port?

Meh, you don't have to, it might give you some more room, not like you need it.