Regarding the EV-680 Casio screen...

radioactivelego · Post by **radioactivelego** » Mon May 30, 2005 4:39 pm

1. I removed the tuner box via desoldering all of the leads and prying it off with a screwdriver, is this all that needs to be done?

2. The square-like piece of metal that helped hold the extendable antenna in place and had a couple of lead soldered into the upper board, do i have to resolder these two back together?

3. How in the hell can you people solder those 16 pins together?! I have a 15 watt and have tried more than a dozen times to connect two leads with no go.

4. I lost the headphone jack, would any jack from Radio Shack work just as well?

*o* · Post by ***o*** » Tue May 31, 2005 2:07 am

4. yes

nos_slived · Post by **nos_slived** » Tue May 31, 2005 2:12 am

3. Try some flux.

radioactivelego · Post by **radioactivelego** » Sun Jun 05, 2005 6:12 pm

Bump for answers 1 and 2.