Handheld Gamecube attempt

BloodNess · Post by **BloodNess** » Tue May 24, 2005 2:23 am

You guys think I could use this tv for a screen. I mean i don't have to mod anything except hook it up to the GC, right. It's an LCD so it doesn't need the LED mod right? It was also the cheapest one i could find... anyway this is the link:

http://www.radioshack.com/product.asp?c ... =16%2D3009

*o* · Post by ***o*** » Tue May 24, 2005 2:27 am

looks fine but it does need the led mod unless playtime is not an issue

BloodNess · Post by **BloodNess** » Tue May 24, 2005 2:46 am

If I do'nt do the led mod, and use 10 NImh AAs how much playtime can i get? If i REALLY have to make that mod... I'm willing to... Send a ps1 screen to somebody so he/she can do it then send it back to me...really.

*o* · Post by ***o*** » Tue May 24, 2005 2:48 am

with mod 2-2 1/2 hours(closer to 2 1/2
without 1 1/2-2 hours (at best)

BloodNess · Post by **BloodNess** » Tue May 24, 2005 2:54 am

wow, that was fast... 1 1/2 hour seems reasonable to me (although playing Zelda twilight princess on a field trip would be SWEET...) I don't know, imean the faster and easier i can make this project the better... but as i mentioned earlier, i am willing to send a screen to anyone that would help make the mod...But 1 1/2 hour is a'ight

*o* · Post by ***o*** » Tue May 24, 2005 3:05 am

ok if you say so

BloodNess · Post by **BloodNess** » Tue May 24, 2005 3:10 am

I'm am gonna start a thread for my GCp and my new Non-portable idea: A redesigned GameCube. So since like the past 4 or five pages have been about people helping me (in a good way, I'm not "bragging")...this thread should bee renamed : 2 Handheld GameCube Attempts(laughs,then sighs...)I"m leaving this thread to it's rightful owner and founder:Gamelver...Look for my thread under the name: "BloodNess' GCp and GC Redesigned" where i will be posting my progress and reading your suggestions. So I hope all the help i've gotten here i will get in my thread. OK

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Tue May 24, 2005 1:36 pm

use a psone screen off of ebay

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Tue May 24, 2005 1:37 pm

*o* wrote:with mod 2-2 1/2 hours(closer to 2 1/2
without 1 1/2-2 hours (at best)

how long could i run a mini snes and a modded psone screen off 6 of those

rad shack ni-mis that is

S q u e e ! · Post by **S q u e e !** » Wed Jun 01, 2005 7:48 pm

Everybody! Check this thread if you already haven't! I have made a way to reduce the size of the disk drive by almost 50%!

Here is where my genious shows!

*Patrick voice: where?!?!*

zenloc · Post by **zenloc** » Tue Jun 07, 2005 3:04 pm

he gamelver

could you make a couple a photo's of the inside of you pGC??

would likt to see how you possitiond everything

honey · Post by **honey** » Mon Jun 13, 2005 10:03 am

hi, can everyone give me a picture (diagram)of an wireing batterie circus from an gcp with psone screen, please

S q u e e ! · Post by **S q u e e !** » Mon Jun 13, 2005 11:47 am

Yes, it will just be a minute.

EDIT: Here it is. Just so you know, you MUST put the "To TV Power in" wire through a 7808 regulator before attaching it to the TV.

Yes this is for the PSone screen, and I did take the CNC made SNES battery diagram and altered it. The block at the bottom is a DC AUX input jack which is Radio Shack #274-246, and the batteries are two of the 7.2V 2000mAh Ni-Cd Battery Pack which is Part #23-322. For the charge jack, you should use the end off of the battery pack, so you dont have to alter the charger.

honey · Post by **honey** » Mon Jun 13, 2005 11:53 am

thanx, i have found this, can i use 2 from this packs (LRP Power Pack 8,4V Akku NiMH 3000 mAh) ?
http://www.monkeytoys.de/product_info.p ... ts_id/1236

S q u e e ! · Post by **S q u e e !** » Mon Jun 13, 2005 12:04 pm

You really should use the batteries I reccomended, because I'm not too sure about those other ones, but they might work. And they also might cost more.