Top of the PCB, all thru hole components removed
Top side with components removed and traces exposed. 50/50 composite from top side clean scan, so all traces can be seen, but also what their reference designations were.
Bottom side the same
GC Controller (Wired) PCB Scans, DOL-003
Moderator: Moderators
GC Controller (Wired) PCB Scans, DOL-003
A few scans of the wired GC controller.
Top of the PCB, all thru hole components removed
Top side with components removed and traces exposed. 50/50 composite from top side clean scan, so all traces can be seen, but also what their reference designations were.
Bottom side the same
Top of the PCB, all thru hole components removed
Top side with components removed and traces exposed. 50/50 composite from top side clean scan, so all traces can be seen, but also what their reference designations were.
Bottom side the same
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.
Re-mappable Wireless 360 Controller - The CGnome
Re-mappable Wireless 360 Controller - The CGnome