Also, has anyone worked with one of these before and or have a pinout for it.
Mad Catz Gamecube LCD
Moderator: Moderators
-
SkyyCorvus
- Posts: 3
- Joined: Fri Jun 29, 2012 5:14 pm
Mad Catz Gamecube LCD
I'm wondering if this thing would be any good for an N64 portable since it runs on 12v just like the 64?
Also, has anyone worked with one of these before and or have a pinout for it.
Also, has anyone worked with one of these before and or have a pinout for it.
-
ProgMetalMan
- Posts: 257
- Joined: Sat Feb 05, 2011 8:18 pm
Re: Mad Catz Gamecube LCD
Knowing MadCatz, it probably sucks.
ShockSlayer wrote:Proggy's right.
ttsgeb wrote:mfw prog was not only right, but 100% so.
-
hailrazer
- Portablizer Extraordinaire
- Posts: 2764
- Joined: Mon Jul 10, 2006 8:57 pm
- Location: Georgia Sweet Georgia
Re: Mad Catz Gamecube LCD
You don't want a 12v screen. You want a screen that will run on 7.4v , because that is what the N64 can run on and then you can use 7.4v batteries.
And yes that screen sucks.
And yes that screen sucks.
My Portable Systems:
-----Genimini---------Darth64---------Dreamtrooper--------Ncube---------Kamikazi64---N64Boy Advance
-----Genimini---------Darth64---------Dreamtrooper--------Ncube---------Kamikazi64---N64Boy Advance
-
SkyyCorvus
- Posts: 3
- Joined: Fri Jun 29, 2012 5:14 pm
Re: Mad Catz Gamecube LCD
Figured i'd ask, seeing as how it wouldn't cost me anything to use it since I already have it.
But I ended up buying a psone lcd anyways since there's so much more documentation on it.
But I ended up buying a psone lcd anyways since there's so much more documentation on it.
-
marcusfinley
- Posts: 5
- Joined: Mon Jul 23, 2012 4:12 pm
Re: Mad Catz Gamecube LCD
I actually tried to use that exact same screen for some other mods and it didn't work out well for me. The voltage is another factor as was just mentioned.