HELLPPP ME PLEASE!!!!!

Mr. Cool · Post by **Mr. Cool** » Fri Apr 29, 2005 4:10 pm

Ahhh My Psonep isnt working! Im using the psone screen and the psone battery pack, and Im just plugging them into the psone. This is so the only soldering I have to do is with the controller and Memory card. I tested the PSone outside the case, and it worked fine, but when I put it inside nothing happened. It didnt even smoke. It just didnt turn on. Does anyone have any clue what could have happened?

Mr. Cool · Post by **Mr. Cool** » Sun May 01, 2005 11:20 am

Why WILL NO ONE HELP ME!! Im SOO CLOSE TO FINNISHING!!! HELLLLPPPPPP!!!

masterpaul · Post by **masterpaul** » Sun May 01, 2005 2:21 pm

Maybe one of wires got riped off. Becarefull

*o* · Post by ***o*** » Sun May 01, 2005 3:22 pm

or a pcb got damaged

flipkickjabernob · Post by **flipkickjabernob** » Sun May 01, 2005 6:44 pm

you may have fried one of the fuses on the board you should try jumping them to see if it works

Mr. Cool · Post by **Mr. Cool** » Mon May 02, 2005 7:47 pm

Screen and batt now work. Psone doesnt. Read the Im done post for more info.

bschank · Post by **bschank** » Tue May 03, 2005 8:48 pm

If you arent using the original case then you may have to worry that the cdrom lid switch is your trouble. dunno just a thought!

Mr. Cool · Post by **Mr. Cool** » Wed May 04, 2005 5:27 pm

Yeah i still have the heat shield on, so ill have to take that off, before i test the mobo. Its all glued down with hot glue, so its hard to take off.Hopefully its just a blown fuse that I can fix. Only problem is, Ill also have to find out what blew the fuse, so ican fix it, so it wont kill the mobo after the fuse is jumped.

benheck.com Forums

HELLPPP ME PLEASE!!!!!

HELLPPP ME PLEASE!!!!!

(No magic smoke) No Problem !