Specs:
5" viscom sceen:
*Remote control, for those times when you cant reach the volume/power button...xD
*ntsc/PAL automatic switching
*brightness/contrast etc adjustment
*mono audio amp with auto headphone switching, oh and a headphone port.
in built memory card
dual analog controller, original board squishy buttons
12v lithium battery, unknown mAh salvaged from laptop cells. room for larger cells, last around 1 hour 15 minutes average
protection and level indicator circuit
psone mobo
free spinning disc drive
yes the screen is huge, the one i wanted to use is way smaller but upon testing seemed to imply that it is fried.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Im relatively new with abs cement, and i sanded this one like crazy but all it did was make the cement smoother without actually giving it the clean, molded into the case look, i guess i'll have to start with higher grits next time.
The screen is sturdy and held on by screws, it is easily replaceable and still very function-able if i ever wanted to swap out the screen.
The case is, yes the shape of a pizza slice, this is the natural shape of the project box i got from jaycar.
Its quite comfortable to hold, however my hands are medium size and have the strength of a piano player xD, any larger/smaller/weaker and it could become a bit uncomfortable if held looking down,
also when the disc is in theres not much of a gap between r1/l1 and the disc, so care is required. However this will be resolved if used burnt games onto cd-rs, however no modchip so swapdisc trick would be required.
Also recently discovered flaw, lame: i installed the memory card into the player 2 port, so 2 of my games cant save, odd that ones multi player aswell.
speed freaks and disney's dinosaur, spyro 1-2-3 work fine same with james bond. odd
Due to the portables flaws it is being sold for cheaper than what i got the parts for. $100 plus s&h
If a charge is required and the buyer wants the original box/wires/instructions for the viscom screen then the price goes to $250 due to a large increase in shipping. the psone is PAL however using the swap disc trick it can play ntsc games, and the screen is pal and ntsc so youll get full colour.
Guaranteed to work however comes in a condition that will hopefully see the future owner to improve it.
Im in australia, $80 aud plus shipping, $120 if you want the box/cables for the screen and the charger. extra 10 for just the charger.
shipping and handling to the USA is $50
