Testing it Out

Insert_Name_Here · Post by **Insert_Name_Here** » Sun Apr 24, 2005 9:53 am

I want to test out my SNES an my LCD but i don't know how to complete this circuit doohicky. I am using a PSOne Screen and I am getting power from the PSOne's second regulator. I attached the stuff as it said in ben's book but i don't know how to complte the circuit. (ex: i don't know where to get the ground form the SNES and where to hook it up on the PSOne)
PS: I don't have the controllers attached.

b_ski30 · Post by **b_ski30** » Thu Apr 28, 2005 10:13 pm

I'm not 100% sure, but on my psxp I just soldered a wire to a ground terminal on the playstation and then connected it to the ground wire coming in to the psone screen for power.

Someone please confirm, or expand on what im saying before you try this.

inuyasha · Post by **inuyasha** » Fri Apr 29, 2005 1:38 pm

look for the multi out on the snes you have to desolder it, it looks like this

12 . . . . . . 2
11 . . . . . . 1
and 4 big holes at the bottem

you can use pin 5 or 6 for ground