Traces

[mymixed]

I'm going to relocate these traces and was wondering if anyone had any tips:


- mymixed

[hidiosoman]

Posted by EVIL NOD on moddedbybacteria:


The black wires up top are what you need to relocate 12v. The red wire is for 3.3v if you cut more than what is shown.

Oh, and that middle place that it connects to is the green. Scrape some green away and solder it there.

Source: http://moddedbybacteria.freeforums.org/ ... d-t82.html" onclick="window.open(this.href);return false;

[mymixed]

Great will do!

[Hrduncan]

you only need to wire the 12v line to the regulator and the 3.3v to the trace ground to ground

[mymixed]

Thanks for the pic but now im confused! A few posts down it says to solder 12v directly to the board. Help?

[Hrduncan]

just solder it to the 5v regulator

[mymixed]

I think I get it now. I'll post a pic soon.

[mymixed]

Oh wow, will this work?


- Ian

[Life of Brian]

Yup. Now you've got it.

[mymixed]

Thanks everyone for all the support!

- Ian