Bush's tiny N64p: The Whacka 64 (FS/Commission!)

AdumUp · Post by **AdumUp** » Fri Aug 13, 2010 2:40 pm

I hope to see this done soon cant wait for a new update

Good luck cramming all that into your case!

Bush · Post by **Bush** » Sat Aug 14, 2010 12:00 pm

Well, SS finished my board yesterday, and Nobble shipped my batteries. All I need now is an expansion pack and some copper for heatsinking. Expect progress soon!!

Bush · Post by **Bush** » Sun Aug 15, 2010 5:42 pm

I need opinions. I made a heat dissapator for the main chips, using some loose metal from a modem case. I cut the pieces, then stacked them to 3 ply, and soldered them together. Its either steel or aluminum, and has little holes all over. I need some opinions on this. With some thermal paste, do you think it will do a good job?

The Smooth · Post by **The Smooth** » Mon Aug 16, 2010 2:36 am

Beta wrote:Should be fine.

Post by **Skyone** » Mon Aug 16, 2010 6:34 pm

The idea of a heatsink is that it has a flat surface with a large area for maximum heat transfer from the chip to the sink. Not really sure what those are going to accomplish in particular, besides maybe winning some modern art show or something. The N64's chips get pretty damn hot, and you'll need to get the hot air away from them with fans/ventilation on top of using some real heatsinks.

Good luck.

Bush · Post by **Bush** » Mon Aug 16, 2010 6:48 pm

Ok, I have an issue. The batteries are a tad too long, so I have a few options. I can order another case and attempt to widen it by using parts from my original case, or I can find a new case with dimensions around 6.5x4x1in. I have yet to find one, so I am willing to sell these; they are 6400 mAh. Let me know if you are interested.

MarioOwnsAll · Post by **MarioOwnsAll** » Tue Aug 17, 2010 6:19 pm

Could you post a pic of your batteries? Personally if the batteries are more then 6" long its not worth it, I would pay a visit to batteryspace and find some better ones.

Bush · Post by **Bush** » Tue Aug 17, 2010 6:54 pm

Im holding on to them/selling them and getting some smaller ones.

Bush · Post by **Bush** » Tue Aug 17, 2010 7:45 pm

This is now called the...

Also: someone buy/commission this nao

Haunted360 · Post by **Haunted360** » Thu Aug 19, 2010 12:41 am

Bush wrote:

Don't you De-solder?!

It looks as if you have just bent the Cartridge slot back and forth, as with the Controller Ports to 'snap' them off!

And if you want your N64 to overheat - your going to right way

You may want to buy some Heatsinks with FINS that will actually Dissipate the heat...

limpport · Post by **limpport** » Thu Aug 19, 2010 10:57 pm

Haunted360 wrote: Don't you De-solder?!

It looks as if you have just bent the Cartridge slot back and forth, as with the Controller Ports to 'snap' them off!

Each to their own. Don't be mean please.

blaze3927 · Post by **blaze3927** » Fri Aug 20, 2010 12:03 am

lol thats how i get my controller port's off xD
bend and snap, or just chop them off with a dremel. most people remove the extra space anyway

Haunted360 · Post by **Haunted360** » Fri Aug 20, 2010 1:34 am

limpport wrote:Each to their own. Don't be a dick.

Moderator please...

budnespid · Post by **budnespid** » Fri Aug 20, 2010 5:48 am

Yeah I don't think the mods will be on your side.

P.S. Dead board.

Bush · Post by **Bush** » Fri Aug 20, 2010 5:56 am

Deal with this elsewhere; limport please edit your post.

benheck.com Forums

Bush's tiny N64p: The Whacka 64 (FS/Commission!)

Re: Bush's tiny N64p

Re: Bush's tiny N64p

Re: Bush's tiny N64p

Re: Bush's tiny N64p

Re: Bush's tiny N64p

Re: Bush's tiny N64p

Re: Bush's tiny N64p

Re: Bush's tiny N64p

Re: Bush's tiny N64p: The Whacka 64 (FS/Commission!)

Re: Bush's tiny N64p: The Whacka 64 (FS/Commission!)

Re: Bush's tiny N64p: The Whacka 64 (FS/Commission!)

Re: Bush's tiny N64p: The Whacka 64 (FS/Commission!)

Re: Bush's tiny N64p: The Whacka 64 (FS/Commission!)

Re: Bush's tiny N64p: The Whacka 64 (FS/Commission!)

Re: Bush's tiny N64p: The Whacka 64 (FS/Commission!)