6th and 7th pin are used for the light gun I think.Hifeno wrote:how did you use a usb plug for the controller. It only has 4 wires. The Snes controller has 7 I think.
Snesp V3
Moderator: Moderators
Re: Snesp V3
-
darthchris13
- Posts: 123
- Joined: Fri Sep 12, 2008 8:31 am
- Location: marseille, france
Re: Snesp V3
The snesp is the first paddle, there is no need to place the snesp on the table if the video out is plugged on the tv, same thing for the paddle 2Donalbain619 wrote:Oh give me a minute while I recover my mind from being blown. Great stuff. Did you put the video connector and the USB port near the bottom so you can prop it up on a table?
-
Donalbain619
- Posts: 92
- Joined: Wed Apr 28, 2010 7:06 pm
- Location: I'm the Man on the Silver Mountain!!
Re: Snesp V3
Awesome. I think vacuum forming gives you the most control over how your portable looks, but is also the hardest to do (make a mold, get a forming table cut out sand sand sand). However you bought the case so you didn't have to do that! 
I have nothing clever to say here. Sorry.
-
darthchris13
- Posts: 123
- Joined: Fri Sep 12, 2008 8:31 am
- Location: marseille, france
Re: Snesp V3
Some pics of the snesp, it's close to the end, just need to place the switch PAL/NTSC et 50/60Hz, after i made the adapter for the second paddle and it's done, 2 pics of the baby.
[img width=720 height=540]http://i35.servimg.com/u/f35/11/45/16/81/dscn8416.jpg[/img]
[img width=720 height=540]http://i35.servimg.com/u/f35/11/45/16/81/dscn8417.jpg[/img]
PS:thanks to marshall, for your help (batteries and the last wiring)
[img width=720 height=540]http://i35.servimg.com/u/f35/11/45/16/81/dscn8416.jpg[/img]
[img width=720 height=540]http://i35.servimg.com/u/f35/11/45/16/81/dscn8417.jpg[/img]
PS:thanks to marshall, for your help (batteries
and the last wiring)-
chipdouglas
- Posts: 33
- Joined: Mon Mar 02, 2009 1:14 pm
Re: Snesp V3
Its looking great make sure to post a video once its %100 complete.
My site: http://whengamescollide.com/" onclick="window.open(this.href);return false;
-
Tibia
- Posts: 1319
- Joined: Thu Feb 28, 2008 2:02 pm
- PSN Username: Tibia1013
- Steam ID: Mulder101361
- Location: Istanbul, not Constantinople
- Contact:
Re: Snesp V3
Very nice casework! I love how it resembles the shape of the SNES cart itself. Fantastic job actually sanding and making it look nice!
This post brought to you by David Duchovny's glorious nipples.
-
darthchris13
- Posts: 123
- Joined: Fri Sep 12, 2008 8:31 am
- Location: marseille, france
-
darthchris13
- Posts: 123
- Joined: Fri Sep 12, 2008 8:31 am
- Location: marseille, france
Re: Snesp V3
Hi guys, i got a problem with the batteries, i use 2X3.7v li-on batteries with safety circuit, but when i have plug charger on the snes, 1 battery is dead ( 0v ) the other one works well ( 4v ).
One thing is strange, i have charged the snesP for the fist time and it's works well, my friend say that he got a problem with sound, he have resend it to me and when i want to recharge one battery dies.
You got an idea about this problem, perhaps the safety circuit wich doesn't works well, or the charger.......
Another problem, with sound this time, there is a crackling when snesp is turned on, this problem is present with speaker and with earphone. Do you have an idea where does the problem.
++
One thing is strange, i have charged the snesP for the fist time and it's works well, my friend say that he got a problem with sound, he have resend it to me and when i want to recharge one battery dies.
You got an idea about this problem, perhaps the safety circuit wich doesn't works well, or the charger.......
Another problem, with sound this time, there is a crackling when snesp is turned on, this problem is present with speaker and with earphone. Do you have an idea where does the problem.
++