N64 useful Info

[RNS0504]

N64 USEFUL INFORMATION

/ 3 2 1 \
| 6 5 4 | Power Connector on N64 MOBO

1= G round
2= 3.3v 2.7A (will run at 1.33A)
3= 3.3v 2.7A (will run @ 1.33A)
4= Ground
5= Ground
6= 12v 0.8A (will run @ 400 ma)

/ 1 2 3 \  Power Connector on AC ADAPTER
| 4 5 6 |

1= Ground
2= 3.3v 2.7A
3= 3.3v 2.7A
4= Ground
5= Ground
6= 12v 0.8A

AV out on N64 board

/ 11 9 7 5 3 1 \
| |
\ 12 10 8 6 4 2 /

1- N/a
2- N/a
3- Common
4- N/a
5- Common
6- Common
7- Luma
8- Chroma
9- Composite
10- +5v
11- Left Audio
12- Right Audio

Controller Ports (Bottom Of Board with Power on Right)

6 5 4 3 2 1

1. Unknown 2. Unknown 3. Common 4. Unknown 5. Unknown 6. Common
CNT-NUS Controller Mem. Card Joystick CNT-NUS Controller Mem. Card

1 V+ 33 V+ 31
2 Right 34 3
3 Up 35 4
4 Left 36 5
5 Down 37 6
6 1 38 7
7 4 39 8
8 6 40 V+ 15
9 5 41 9
10 V+ 2 42 10
11 Start 43 11
12 A 44 12
13 C Down 45 13
14 C Right 46 14
15 B 47 16
16 C Left 48 32
17 C Up 49 30
18 Gnd 3 50
19 Gnd 1 51 Gnd 29
20 Z 52 Gnd
21 R 53 28
22 54 27
23 55 26
24 24 56 25
25 23 57 Gnd
26 22 58 L
27 21 59 Gnd
28 20 60
29 19 61 Gnd
30 18 62
31 2 63
32 Gnd 17 64 V+


Thanks TO GANNON FOR THAT
And for an easier to read controller data sheet: http://gannon.tk/n64-controller.txt


N64 wiring diagram:
[img]http://img197.echo.cx/img197/1977/n64wiring4ie.gif[/img]


There You go! Post suggestions here

[bicostp]

This should be a sticky. All of it is useless for me, however. (I'm building a PSonep.

[gannon]

And for an easier to read controller data sheet: http://gannon.tk/n64-controller.txt
Note: I never did finish drawing up the red, white, and black controller wire input schematic to the main chip. It's pretty hard with all those smt parts

[HiHi]

thx RNS0504 and thats right gannon urs is much easier 2 "follow"