Does this stick mod look legit?

[popfan97]

If you can use any, why don't you just use a gamecube controller instead of a weird N64 controller?

[Diminuendo]

Thanks kibble, I cant afford to pay you much, but I can probably send $10, $20 your way though

[Diminuendo]

btw if thats not enough can negotiate, make me an offer

[kibble]

Don't worry about that yet. I'm still doing some research and playing with code, I think I found some that will help. I'm gonna be trying this out soon. If I get something working then we can negotiate, if there's enough interest in it, I can even order more parts and possibly sell a pre-built board.

[kibble]

Been messing around with the ADC inside a PIC16F873 and I got a very simple program to run on it that converts the voltage output from a analog control stick to a binary value. The chip I'm using is quite large and has more stuff in it than required, but it's what I have to play with at the moment and I'll eventually I'll be modifying the code to work with smaller PIC's, once I get a hold of some. Here's a video, I will also be posting this on my 64p WIP thread.

[technoforlive]

here i found this http://www.rentron.com/four-channel-ad.htm

[kibble]

here i found this http://www.rentron.com/four-channel-ad.htm

one of the chips they showed on there could work except for the fact that the GP3/MCLR/Vpp pin is only an input without AD capabilities and you need 4 outputs total to go to the controller chip.

The next step up from there are 14 pin devices and the one I'm leaning towards using is a 16F526.

[whynot123]

If this thing works out, I'd be interested too !!

[kibble]

Been making some progress with this, you can read more details here: http://forums.benheck.com/viewtopic.php?f=5&t=32430" onclick="window.open(this.href);return false;

[whynot123]

Thanks ! I'll be following this closely