N64 switch and reset button

[rootbeerben3]

I'm building a portable n64. I tryed to remove a switch and the reset button. However, I broke the switch. I want to solder it in the "on" postiton and just put a switch on the wire from the battery to the n64. ON the switch, what holes (1,2,3,4,5,6,7,8) would i solder to each other? Would it be like 1 to 2 and 3 to4 and so on?

http://s951.photobucket.com/albums/ad35 ... t=port.jpg" onclick="window.open(this.href);return false;

that is what the port looks like and how it is labled

thanks

[joeafro]

hope this helps

http://img526.imageshack.us/img526/3460/60998309.jpg" onclick="window.open(this.href);return false;

[snowpenguin]

You don't need to replace the reset switch, removing it works fine.

[limpport]

Yeah, you really don't need a reset switch. It'll just be more wiring and space-wasting. Just don't bridge the connection on the reset switch! It would make it think the switch is constantly pressed.