Battery's question

Snesboy · Post by **Snesboy** » Tue Feb 22, 2005 9:39 pm

I have a 9.6v battery from an RC car. Can i use that to power my SNESp?
Plus i need to know how to connect the darn battery to my system (I'm new to portableizationizing consoles)

P.S if anyone has any tips on how to make a SNESp please tell me.

goodie · Post by **goodie** » Tue Feb 22, 2005 9:43 pm

Yes, you'll need a power regulator to drop it to 5 volts, then you'll be set.

Guest · Post by **Guest** » Tue Feb 22, 2005 9:44 pm

what type and stuff (again, my brain is empty when it comes to this stuff)

Snesboy · Post by **Snesboy** » Tue Feb 22, 2005 9:45 pm

A 5v 7805 regulator?

Post by **gannon** » Tue Feb 22, 2005 9:48 pm

Snesboy · Post by **Snesboy** » Tue Feb 22, 2005 9:51 pm

o yea!!

me so smart

(actually my dad told me that one, he's good with electronics)

by the way how do I connect it to the system?

goodie · Post by **goodie** » Tue Feb 22, 2005 10:45 pm

Here you go:

If you're not using a PSOne screen, you can ignore that part.

soundwave · Post by **soundwave** » Wed Feb 23, 2005 2:00 pm

"portableizationizing", thats a good'un.

Snesboy · Post by **Snesboy** » Wed Feb 23, 2005 3:51 pm

thx everyone

Lucretius · Post by **Lucretius** » Wed Feb 23, 2005 5:31 pm

soundwave wrote:"portableizationizing", thats a good'un.

That is sooo my word...evryone says "portablizing" I say "portablizationing"...hmph

.

Insert_Name_Here · Post by **Insert_Name_Here** » Fri Feb 25, 2005 5:28 pm

I was thinking about doing that w/ my RC battery too. I have a question, how do you recharge the RC battery if you screw w/ the connector at the end. ( I mean, the thing that you hook up to the charger). Also, how do you split the wire like that shown in the picture? ( or maybe the picture was decieving me...)

goodie · Post by **goodie** » Fri Feb 25, 2005 8:51 pm

You don't need to split it. Just use multiple wires.

MM007 · Post by **MM007** » Fri Feb 25, 2005 10:09 pm

The SNES already has a 7805 onboard, so you can put the 9.6 right into the plug. I didn't see anyone mention that here...

extremesonic · Post by **extremesonic** » Sun Apr 03, 2005 4:11 pm

Insert_Name_Here wrote:I was thinking about doing that w/ my RC battery too. I have a question, how do you recharge the RC battery if you screw w/ the connector at the end. ( I mean, the thing that you hook up to the charger). Also, how do you split the wire like that shown in the picture? ( or maybe the picture was decieving me...)

Yeah I was wondering the same thing, could you just have two wires going from the battery or what?

sanityisoverrated · Post by **sanityisoverrated** » Tue Apr 05, 2005 8:52 pm

are u talking about charging the battey while inside the portable, or are u thinking the wires are connected directly to battery

no idea what is meant so i will do several cases

If u mean from inside the portable depending on the kind of charge u could hack it up and put a special connector on it and another one coming out from the battery so you would be able to charge the battery inside.

if it like the battery my brother has it flat with metal contacts some of them have a second set used for charging but my first idea would work if u soldered directly to the contacts

or if u can get a crappy Rc car that takes that battery there is probably a way to make it easy to remove battery for charging, get 2 play one while charging.
---------------

I can;t wait till i find a good gradge sale with some systems that work ill buy them and make them portable but right now im cheap and don;t feel like messing with my systems and buying the screens. lol but right now im in electronics at school and could get a lot of commponets for free but i graduate soon