WTT Parts, systems, accessories

Looking for a special part, or have extra stuff you don't need? Trade, sell and buy it here. (Note: Transactions are not monitored by benheck.com)

Moderator: Moderators

Post Reply
sm301
Posts: 11
Joined: Tue Jan 06, 2009 6:35 pm

WTT Parts, systems, accessories

Post by sm301 »

Hi I have a few things im looking to get rid of i have

1 working gamecube it just needs a new shell it doesnt have the top half and the bottom half is purple. (has all cables no controller)
2. working genesis system (has cables with controller)
3. 2 broken dreamcasts (in pieces ones missing its drive i had bout 60 on ebay before and these are left over i dont even have cables to test them anymore)
4.3 xbox 360 controller boards (edit: not the rf boards i do have one of those though) (they work but it was from led mods that i messed up on each controller has a ripped off tracepoint)
4.2 360 controller shells
5. 2 complete 360 shells with faceplate
6. xbox 360 toshiba drive
7. completely dead 360 motherboard (i dont have the matching drive board or key)
8.2 sets of 360 heat sinks with x clamps
9.a 360 20gb hard drive that gives an e68 error sometimes but not always it picks and chooses when to work
10. an offical nintendo silver gamecube controller
11. 2 gamecube controller extenders
12. a working original xbox (with cables no controller)
13. a z64 development kit (not sure if i want to get rid of that yet depends on the offer i get)
14. a bunch of 64 controllers (3 gray, one of them was a pull from a nintendo kiosk and has a nintendo rumble pack superglued in that requires no batteries, one clear purple, and a clear red)

what im looking for
im trying to build a portable snes using the guide online from bens book. i already have the mini snes and sony screen. i need
1. the soft tact switches that feel like original controllers (i dont feel like ordering them from hong kong im really impatient lol)
2. someone who can led mod my sony screen because im nervous ill get dust behind the lcd and ruin the whole thing
3. someone who can print the front image on vinyl without the brightness and volume buttons i want to make it so if you hold select down you can use the d pad to change those settings
4.the 6 rechargeable batteries needed to run it.
5. someone who can front light my neo geo pocket color.
if you have anything else i didnt list even if it doesnt have to do with the portable snes let me know what you have i still might be interested

i know im new here so if im trading with someone on here whos been here awhile ill mail the item to you first so you know im not scamming you. with the exception of the systems ill pay for shipping to you for the items. systems usually cost more to ship so youd have to pay for the shipping. thanks!
mmoshkowich
Posts: 381
Joined: Tue Oct 07, 2008 6:52 pm
PSN Username: mikedacat
Location: Long Island, NY

Post by mmoshkowich »

do you have the xbox 360 controller buttons?
sm301
Posts: 11
Joined: Tue Jan 06, 2009 6:35 pm

Post by sm301 »

mmoshkowich wrote:do you have the xbox 360 controller buttons?
no i dont sorry i used to have a lot but cant find them if i find them ill let you know
XCVG
Senior Member
Posts: 1947
Joined: Sun Dec 21, 2008 9:10 pm
Location: Canada

Post by XCVG »

How much for the XBOX? (mostly out of curiosity)
sm301
Posts: 11
Joined: Tue Jan 06, 2009 6:35 pm

Post by sm301 »

XCVG wrote:How much for the XBOX? (mostly out of curiosity)
if i were to sell it for cash like 25 plus shipping. i forgot to mention its softmodded though. i just realized i didnt put it in.
XCVG
Senior Member
Posts: 1947
Joined: Sun Dec 21, 2008 9:10 pm
Location: Canada

Post by XCVG »

Can I get a shipping estimate to western Canada?
sm301
Posts: 11
Joined: Tue Jan 06, 2009 6:35 pm

Post by sm301 »

XCVG wrote:Can I get a shipping estimate to western Canada?
to ship it ups would be around 27 dollars. paypal shipping calculator quoted me at 26 to mail to british columbia (thats western canada right?) and the ups site quoted me at 28. i couldnt get usps to give me an accurate estimate because it kept trying to say i could only mail it express.
XCVG
Senior Member
Posts: 1947
Joined: Sun Dec 21, 2008 9:10 pm
Location: Canada

Post by XCVG »

Sorry, but I don't think I can afford that shipping. I'll just have to find one somewhere else.
gameboy fixer 77
Posts: 60
Joined: Sun Jan 11, 2009 6:08 pm
Location: united kingdom neutral zone

Post by gameboy fixer 77 »

how much for shipping for dreamcast to USA, 91360?
64M320N3
Posts: 790
Joined: Wed Apr 16, 2008 5:27 pm
Location: Ft. Collins

Re: WTT Parts, systems, accessories

Post by 64M320N3 »

oooh...
how much for the z64 (haven't been able to find another one to compare the price with so i have no idea to offer)
Making stuff with my new beautiful CNC machine!
Would you like a professional looking custom case for your portable? I may be able to help you. Check out this link:
http://forums.benheck.com/viewtopic.php?f=13&t=32724
sm301
Posts: 11
Joined: Tue Jan 06, 2009 6:35 pm

Re: WTT Parts, systems, accessories

Post by sm301 »

64M320N3 wrote:oooh...
how much for the z64 (haven't been able to find another one to compare the price with so i have no idea to offer)
i paid 250 for it about 6 months ago. honestly i just want it gone now i never really play it much like i used to. im selling the unit a 2.5 to 3.5 hard drive converter. a 10gb 2.5 hard drive the original zip drive a usb zip drive and 5 100mb zip disks for 200 or best offer and that includes shipping in the united states. for something that high in price though i would only sell it through paypal which makes it safer for everyone anyways.

and i would sell the 2 dreamcasts with shipping for like 20 dollars shipped
sm301
Posts: 11
Joined: Tue Jan 06, 2009 6:35 pm

Post by sm301 »

actually i need to keep the usb zip drive and the disks for it. without them ill sell the unit for 150 shipped or best offer.
emeraldz
Posts: 307
Joined: Tue Jan 22, 2008 6:07 pm
PSN Username: Ktiger41
Location: USA

Post by emeraldz »

PM Sent. Please reply. :wink:
Post Reply