Xbox 360 Hard Drive Cable

x 77 x · Post by **x 77 x** » Mon Sep 22, 2008 10:34 am

Anyone know if there is a premade cable made to connect a stock HDD to the stock HDD Mobo port? Or of a place to get the connectors for each side?

A cable that combines the SATA Data and power into one cable to connect the two ports shown below. I want to use my stock HDD on a case mod I'm working on. I want to be able to switch HDDs easily.

SonyPortableizer · Post by **SonyPortableizer** » Mon Sep 22, 2008 5:08 pm

A little confusing?
In one question what is it that you want?
I also have an Xbox 360 to HD cable if you want it

EIDT:Yep, I have one

Not, I can sell it to anyone if they want
Also, yes you can probably do this, you just need to make sure there is no power going to it, or find a switch that can connect 44 things

on and off

vskid · Post by **vskid** » Mon Sep 22, 2008 5:21 pm

You want to be able to plug the stock HD in, but not right to the motherboard, right? You could desolder the connector off the motherboard and move it to where you want it. I think that the only place you could get those connectors is off of other 360s and HDs.

x 77 x · Post by **x 77 x** » Mon Sep 29, 2008 12:50 pm

vskid wrote:You want to be able to plug the stock HD in, but not right to the motherboard, right? You could desolder the connector off the motherboard and move it to where you want it. I think that the only place you could get those connectors is off of other 360s and HDs.

I was looking for a cable to plug this...

directly into this...

But on to Plan B. I make my own. Probably using cable/connector from broken hard drive and transfer cable or connector off a broken 360 mobo(if I can get one cheap.)