Snes controller addon board pinout.

jeroen · Post by **jeroen** » Thu Jan 25, 2007 3:39 pm

I need a pinout for the connector, on the motherboar ,that connect to the little controller addon board.

This is a pal snes. (original)

edit: http://img182.imageshack.us/my.php?imag ... tor7mx.jpg

Kurt_ · Post by **Kurt_** » Thu Jan 25, 2007 3:46 pm

There's a really good topic about this. But it's old. I'll try to dig for it, you should do the same.

jeroen · Post by **jeroen** » Thu Jan 25, 2007 3:51 pm

You mean this one http://benheck.com/phpBB/viewtopic.php? ... ller+board

It won't work. But I have the same problem.

Edit: found the thread. http://benheck.com/phpBB/viewtopic.php? ... nes+pinout

I should've searched. Btw. someone might wana add this to the sticky

SNESguy · Post by **SNESguy** » Fri Jan 26, 2007 12:10 am

Yep. Those are the correct pinouts. If you read to the last page, you'll actually see that I confirmed that they were correct when I used them on my SNESp Mk II.

Man, that brings back good memories, good times!!