Composite Video mod (old method)

|B| · Post by **|B|** » Mon Apr 10, 2006 8:09 pm

Hello. A couple years ago I put together the composite video mod on my 2600 using Ben's old method. It worked, but I couldn't get the colors on the screen quite right. I decided to give it a try again tonight, but I can't even come close while using Pitfall. From looking at a screenshot, the top layer of the ground should be yellow and the bottom should be orange-brown. I can't get the top layer of the ground to change from brown at all, i've tried turning both potentiometers to both ends.

Any suggestions are appreciated. Thanks!

B

jeroen · Post by **jeroen** » Tue Apr 11, 2006 10:39 am

Did you udjust it with the potionmeters? If not read better next time.

|B| · Post by **|B|** » Tue Apr 11, 2006 6:49 pm

Yes, the potentiometers are the only way to adjust the color.