benheck.com Forums

Hi,

I have plugged a psone screen on a snesp, i have used this picture to wired the left and the right sound coming from snes board. If i plug the audio left ( white circle) and the audio right ( red circle ) as given on the picture bellow but i don't have sound , all other wires for speaker works ...

Hi guys, i got a problem with the batteries, i use 2X3.7v li-on batteries with safety circuit, but when i have plug charger on the snes, 1 battery is dead ( 0v ) the other one works well ( 4v ).
One thing is strange, i have charged the snesP for the fist time and it's works well, my friend say that ...

I used the board of my snesP V1. For this snesp one thing was important, doing a snesp as small as possible and simple to make, that's why i used the complete board of the snes control paddle, a little screen simple to use, an audio amp of iphone, all of this things was simple to wired. The main ...

-----

Hi guys, i come with a new sneP, the last one this time.

ALways the same way to do the box, with plastic cards, a 3.5" lcd, 2 batteries 18560 3.7v 2800mA.

Here is some pics:

http://i35.servimg.com/u/f35/11/45/16/81/dscn8615.jpg
http://i35.servimg.com/u/f35/11/45/16/81/dscn8616.jpg
http://i35 ...

Some pics of the snesp, it's close to the end, just need to place the switch PAL/NTSC et 50/60Hz, after i made the adapter for the second paddle and it's done, 2 pics of the baby.

[img width=720 height=540]http://i35.servimg.com/u/f35/11/45/16/81/dscn8416.jpg[/img]
[img width=720 height=540]http ...

Oh give me a minute while I recover my mind from being blown. Great stuff. Did you put the video connector and the USB port near the bottom so you can prop it up on a table?

The snesp is the first paddle, there is no need to place the snesp on the table if the video out is plugged on the tv, same ...

You need 5 wires for the control pad, on the usb connector you got four pins and the ground, 5 connection.

Very nice job working with the case! I'm glad it found a good use. It's a tad small for the SNES but it's doable.

I used 6 AAs in the first version, they were high quality 2300mAh Energizers. Fully charged, the unit ran for around 40 minutes. Even though the PSone screen was modded with LEDs, the ...

Well, i have made the first test with the screen, to see if it works properly, and tadaaaaam it works, ouf ^^, i cut a big part of the screen board, not sure will works after :p.

Front is painted and screen, the buttons and the cross are mounted need to wired all parts now.
http://i65.servimg.com ...

Thanks :)

Well, cut is done for charging connector, tv out and 2nd pad.

http://i65.servimg.com/u/f65/11/45/16/81/dscn8219.jpg
http://i65.servimg.com/u/f65/11/45/16/81/dscn8220.jpg
http://i65.servimg.com/u/f65/11/45/16/81/dscn8221.jpg
http://i65.servimg.com/u/f65/11/45/16/81/dscn8222.jpg ...

Thanks guys :)

Well, i have placed the video output connector and the second pad connector, for the pad i use an usb connector, more little than a snes original connector.

http://i65.servimg.com/u/f65/11/45/16/81/dscn8215.jpg
http://i65.servimg.com/u/f65/11/45/16/81/dscn8216.jpg
http://i65 ...

Hi all,

I'm back again, this time it will be the last snesp i made ^^. This one is not for me, i do it for a friend "hedge".

Well, I will do it with:

-Psone screen
-Snes mini
-Box made by marshall (bought by hedge)

Well, let me show you the pictures of it
http://i65.servimg.com/u/f65/11/45/16 ...

Double post sorry, my snesp is for sale on ebay, start price at 1 dollars, if people are interested you can search on ebay with "supernintendo portable"

bye.

I have made a little video to show how the snesP works

SNESP V2

++