Difference between revisions of "System Overview"
| Line 1: | Line 1: | ||
| − | The pinHeck system is a microcontroller-based pinball machine control system developed by Benjamin J Heckendorn and Parker | + | The pinHeck system is a microcontroller-based pinball machine control system developed by Benjamin J Heckendorn and Parker Dillmann. |
The system contains (2) microcontrollers: | The system contains (2) microcontrollers: | ||
Revision as of 15:44, 12 September 2015
The pinHeck system is a microcontroller-based pinball machine control system developed by Benjamin J Heckendorn and Parker Dillmann.
The system contains (2) microcontrollers:
Microchip® PIC32MX795F512 processor, 32 bit, operating at 80MHz
PIC32 for short. This is the heart of the system. It runs your game code and drives everything except for DMD and audio. A fully programmed pinball kernel will operate at approximately 10,000Hz (or 10,000 cycles per second)
Parallax Propeller P8X32A, 32 bit, operating at 80MHz
Propeller for short. The Propeller has 8 cores that operate in true parallel fashion (no interrupts) and this makes it ideal for the audio-visual portions of the pinball machine. It is connected to the PIC32 via a SPI-like bus. The PIC32 sends it commands such as "Play Music" "Run DMD animation" and "Update Score" and the Propeller executes.
