FIXED!! GCp Progress thread...Khaag's GCp BACK ON THE ROAD!

Harshboy · Post by **Harshboy** » Tue May 16, 2006 6:41 pm

Is this right...if so, i'll post it in the sticky:

Red= Right Audio
White= Left Audio
Yellow= Composite Video
Black= Ground

Post by **Skyone** » Tue May 16, 2006 6:45 pm

Should be right, yes.

khaag · Post by **khaag** » Tue May 16, 2006 6:56 pm

Here is my updated wiring diagram:

Thanks to a few different people for showing me the GC Video Pinouts!:D

Harshboy · Post by **Harshboy** » Tue May 16, 2006 7:10 pm

Cool.....i knew most of that (Thanks to Skyones diagram) but thats a good diagram. Nice and clean

You might wanna connect GCN Ground to Zenith ground though

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Tue May 16, 2006 7:36 pm

Harshboy wrote:You might wanna connect GCN Ground to Zenith ground though

that diagram looks fine to me, he has ground coming from the PSU,

khaag · Post by **khaag** » Tue May 23, 2006 2:05 pm

Yes! I finally got my screen for my GCp and now have everything I need to get started except for a few small miscellaneous components!:D I'll be updating again soon!

Post by **CronoTriggerfan** » Tue May 23, 2006 2:49 pm

You're welcome

.

CTFan

khaag · Post by **khaag** » Tue May 23, 2006 9:13 pm

So is this right?

-Connect positive to: slot 1-pin 1

-connect negative to: slot 1-pin 2

-connect comp. video in to: slot 2-pin 1connect right audio in to: slot 2
pin-2

connect left audio in to: slot 2-pin 3

Is that right?

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Wed May 24, 2006 5:08 am

yeah that should work but it may be hard to solder to all those pins, try soldering to the wires that come from the jacks

khaag · Post by **khaag** » Wed May 24, 2006 8:55 am

thanks! ill try that:D

Krepticor · Post by **Krepticor** » Wed May 24, 2006 8:56 am

yea nice clean diagrams need to be stickied

Post by **CronoTriggerfan** » Wed May 24, 2006 12:48 pm

Or if you're wiring composite, you can just solder to the leads on the back of the screen motherboard. I think it's easier!

CTFan

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Wed May 24, 2006 1:25 pm

Krepticor wrote:yea nice clean diagrams need to be stickied

khaag didnt make that screen diagram it came from the screen sticky

khaag · Post by **khaag** » Wed May 24, 2006 5:12 pm

I made the diagram!

That is mine! How dare you say that i got it from the sticky...

OK, I'm not that mad

But it is mine!

khaag · Post by **khaag** » Wed May 24, 2006 5:13 pm

khaag wrote:Here is my updated wiring diagram:

Thanks to a few different people for showing me the GC Video Pinouts!:D

I made the diagram!

That is mine! How dare you say that i got it from the sticky...

OK, I'm not that mad But it is mine!

CronoTriggerfan wrote:Or if you're wiring composite, you can just solder to the leads on the back of the screen motherboard. I think it's easier!

CTFan

Ya, I think I might do that.