Possably a GCP

Harshboy · Post by **Harshboy** » Sun Dec 18, 2005 9:12 am

ok.....i'll just buy an RC car battery pack.......also, for the PSOne screen...i need to know which one of the pinouts is possitive and negative........just the power! Not the video and stuff....I want to know the pinouts for the input power and output......i would test, but i'm broke and have no multimeter

daguuy · Post by **daguuy** » Sun Dec 18, 2005 9:18 am

Harshboy · Post by **Harshboy** » Sun Dec 18, 2005 9:30 am

ok....thanks a lot......now, for this other connecter, is this right?

EDIT: Wait, thats wrong, I think....but please still tell me.

Post by **marshallh** » Sun Dec 18, 2005 10:19 am

Please refer to this pinout by yours truly.

Harshboy · Post by **Harshboy** » Sun Dec 18, 2005 10:32 am

Harshboy wrote:ok....thanks a lot......now, for this other connecter, is this right?

EDIT: Wait, thats wrong, I think....but please still tell me.

Ok, cool...but can you tell me if this pic is right or wrong? And if wrong...fix it for me. Thankyou everybody for your help.

Post by **gannon** » Sun Dec 18, 2005 11:45 am

ooo... a nicer looking pinout image

MaDnEsS · Post by **MaDnEsS** » Sun Dec 18, 2005 12:33 pm

cant you wire a GC the same as a n64 to my unerstanding the have the same pinout

Harshboy · Post by **Harshboy** » Sun Dec 18, 2005 12:38 pm

what pinouts are you talking about..if your talking about the video ones...i think they are they same...

timmeh87 · Post by **timmeh87** » Sun Dec 18, 2005 12:39 pm

if anyone is trying to figure out which of two contacts is ground, just trace them both with your eyes. the ground is always the one thats connected to the big empty spaces of copper. the "grounding plain" if you will.

Harshboy · Post by **Harshboy** » Sun Dec 18, 2005 12:43 pm

i already figured out the pinouts like an hour ago...so my question has been answered. Thanks for all the help.

daguuy · Post by **daguuy** » Sun Dec 18, 2005 4:17 pm

Harshboy wrote:is this right?

the bottom one's right but the top one is mixed up

MaDnEsS · Post by **MaDnEsS** » Sun Dec 18, 2005 4:35 pm

Harshboy wrote:what pinouts are you talking about..if your talking about the video ones...i think they are they same...

ok i was just making sure yah i was talking about the video

that makes a GCP 10% easier for me

Harshboy · Post by **Harshboy** » Sun Dec 18, 2005 5:06 pm

i have been trying and trying, but when i solder the wires to the power pinouts...it resists...it wont stick! I'm gonna ask my dad to get out his good soldering iron and try....i was using a wimpy one...and it was a gun, so it was harder to hold right. I have soldered lots of things...but this, it's just evil

Helpness............ut whats cool is i found these wires that can just slide onto those video pins! It works so i'm just gonna add some electric tape to make sure they dont come off. I'm just tryin to get the thing ready for Christmas...that way all i have to do is buy batteries and a permanent case

My mom thinks the thing is gonna explode or something because its in a box.......even when it's not plugged in.......but, that's just how moms are, i guess

minkster · Post by **minkster** » Sun Dec 18, 2005 7:53 pm

Don't use a soldering gun, you have a better chance of frying components! I believe they require more watts than soldering irons, so it can get really hot. And to make the wires stick, use lemon juice...it works like a charm

Harshboy · Post by **Harshboy** » Sun Dec 18, 2005 7:58 pm

yea...next time i'll ask my mom for lemon juice when she goes to store.

Me: Mom, get me some lemon juice
Mom: Why?
Me: So i can solder something
Mom: