Wondering how I can do a mod to my n64 to run off batteries

FLAPJACKDAN · Post by **FLAPJACKDAN** » Tue Mar 01, 2011 6:39 pm

Really want to buy from that site but apparently I would need to buy 2 hazmat bags for the batteries which are 25 dollars each. I don't know completely though since I don't understand this whole haz mat fee.

hailrazer · Post by **hailrazer** » Tue Mar 01, 2011 6:47 pm

FLAPJACKDAN wrote:Really want to buy from that site but apparently I would need to buy 2 hazmat bags for the batteries which are 25 dollars each. I don't know completely though since I don't understand this whole haz mat fee.

No you don't "have" to buy them. Just skip that part or delete it from your cart.

FLAPJACKDAN · Post by **FLAPJACKDAN** » Tue Mar 01, 2011 6:59 pm

Well I just bought my parts hopefully I will be able to have them by Friday or Monday.

Basement_Modder · Post by **Basement_Modder** » Tue Mar 01, 2011 10:04 pm

Haunted360 wrote:
Basement_Modder wrote:God, haunted, don't post without proper knowledge.
1) He can just wire DIRECTLY to the pin's solder pads AFTER the SMT crap.

2) The grey ribbon is useless.

1) Why can't he solder directly to the PADS (seen in his photo with the grey line going to it) on the PLUG? Please explain so I can learn Basement...
That's what I was saying he COULD do, as earlier in the thread you said he couldn't use the plug due to the smt crap.

2) Yea, thats why I said solder to the pins above but explain WHY he cant? Do you bypass the SMT's or let the battery's power go normally through them??
BYPASS

Also, looking at your last diagram, you don't need the extra wires. You drew 3.3v going to 2 pins. Just wire it to one of them. Either one. Same with GND.

FLAPJACKDAN · Post by **FLAPJACKDAN** » Wed Mar 02, 2011 9:49 pm

You mean I can wire it like so?

Uploaded with ImageShack.us

Basement_Modder · Post by **Basement_Modder** » Thu Mar 03, 2011 6:06 am

Yes, that will work.

FLAPJACKDAN · Post by **FLAPJACKDAN** » Sat Mar 05, 2011 10:34 am

For this project can I use wire from an old psu?

Basement_Modder · Post by **Basement_Modder** » Sat Mar 05, 2011 11:15 am

You can, yes.

Use any wire you want that is at least 24AWG or so.

FLAPJACKDAN · Post by **FLAPJACKDAN** » Sat Mar 12, 2011 5:59 pm

Well I finished it this morning with the help of my dad. Also for some reason I needed the 2 3.3v pins to be both bridged and the 3 GND pins to be bridged too. Anyway it worked and it all fit in the power supply brick after a bit of trimming on the inside of it. Heres the final result:

Basement_Modder · Post by **Basement_Modder** » Sun Mar 13, 2011 7:28 pm

Nice. Strange you had to bridge the pins, though. I never have.

n00bdud3 · Post by **n00bdud3** » Mon Mar 14, 2011 3:54 pm

That looks pretty sweet. If I can find my old, broken power supply I may have to do something like this for power outages.

FLAPJACKDAN · Post by **FLAPJACKDAN** » Mon Mar 14, 2011 5:54 pm

Thanks for the comments.

benheck.com Forums

Wondering how I can do a mod to my n64 to run off batteries

Re: Wondering how I can do a mod to my n64 to run off batteries

Re: Wondering how I can do a mod to my n64 to run off batteries

Re: Wondering how I can do a mod to my n64 to run off batteries

Re: Wondering how I can do a mod to my n64 to run off batteries

Re: Wondering how I can do a mod to my n64 to run off batteries

Re: Wondering how I can do a mod to my n64 to run off batteries

Re: Wondering how I can do a mod to my n64 to run off batteries

Re: Wondering how I can do a mod to my n64 to run off batteries

Re: Wondering how I can do a mod to my n64 to run off batteries

Re: Wondering how I can do a mod to my n64 to run off batteries

Re: Wondering how I can do a mod to my n64 to run off batteries

Re: Wondering how I can do a mod to my n64 to run off batteries