portable tv screen help

Post by **marshallh** » Sun Oct 02, 2005 5:32 pm

Yes, I agree but someone who has little electornics experience might be better off starting out simpler.

I'm just saying, decman, if you run into problems while doing this project then don't feel bad, it's definitely not easy. Just keep reading and searching and eventually you'll figure it out.

daguuy, how far are you with your n64p?

daguuy · Post by **daguuy** » Sun Oct 02, 2005 5:41 pm

what i've done:
1. got battery
2. got/fixed screen
3. modded N64 case
4. fried a controller
5. cut off EXP slot
6. got RCA jacks and switches
7. figured out all the wiring and stuff

what i have to do:
1. LED mod screen
2. get DC-DC convertor
3. get 3rd pary controller and split it
4. finish cutting new heatsinks
5. get expantion pack
6. get shoe-goo to put together the case
7. maybe eventually relocate cart slot

Post by **marshallh** » Sun Oct 02, 2005 5:44 pm

sounds familiar, I've fried 2 controllers, one I cut off too much of the PCB, the other I accidentally shorted across the leads of my 12v test battery.

Gonna get a boomerang if I can find one.

decman · Post by **decman** » Mon Oct 03, 2005 4:07 am

thanx 4 all the posts and help. im not compleatly new at the world of portablising, i have made a portable ps1 with a mate (we broke it tho but it worked 4 a while) i have solderd and we have a work shop at school that i use a lot, i have a plan for makin it and i have everything except a screen and a case but i can get them. im making it in a card board box first then im gunna make a case. ill update you with pics when it all comes together so look out in the ps2/xbox and gamecube section for my pics

daguuy · Post by **daguuy** » Mon Oct 03, 2005 8:08 pm

cardboard's not the best thing to use in a portable

decman · Post by **decman** » Tue Oct 04, 2005 4:13 am

lol i no im using card board just to put it in untill i make a case out off plastic