AV from psone screen to n64

[TheGeneral]

hey guys i just got around to buying a new battery but if the battery is out of stock on batteryspace, is there a wait?

[TheGeneral]

would it make sense to use two of these?
http://www.batteryspace.com/highpowerpo ... arate.aspx" onclick="window.open(this.href);return false;

[hailrazer]

http://forums.benheck.com/viewtopic.php?f=43&t=34576" onclick="window.open(this.href);return false;

[TheGeneral]

oh i see, but if i connect two in a series i will still get the same amount of amps but double voltage and this will be enough to power the n64p that i'm building, correct? also if i just use the diagram for the pcb there i should use p+ and p- as the outs connecting to the n64 and screen, right? i wish my original battery cell didn't burn out..

[TheGeneral]

also i have a charger that is 7.5v and im wondering if it'll work on these batteries

[hailrazer]

also i have a charger that is 7.5v and im wondering if it'll work on these batteries

Only if it is a Lithium Smart Charger. And they usually output 8.5v

oh i see, but if i connect two in a series i will still get the same amount of amps but double voltage and this will be enough to power the n64p that i'm building, correct? also if i just use the diagram for the pcb there i should use p+ and p- as the outs connecting to the n64 and screen, right? i wish my original battery cell didn't burn out..

Yes and Yes.

[TheGeneral]

i am talking about the psone screen adapter in specific

[hailrazer]

i am talking about the psone screen adapter in specific

No it will not work as a Lithium Poly charger.

[TheGeneral]

ok thanks hail

[TheGeneral]

by the way would you know what to wire to if i wanted to put a green/red charging indicator? should i use a zener diode?

[TheGeneral]

im waiting for the batteries to come but if i wanted to switch from battery power to wall power how would i do that?

[hailrazer]

im waiting for the batteries to come but if i wanted to switch from battery power to wall power how would i do that?

A SPDT switch. Wire it to the positive line that goes to the sytem/screen/Ti regulator.

Battery power on one side, wall power on the other, power out to the system on the output.

[TheGeneral]

and all wires going to the switch are positive?

[ToastBucket]

yup

[TheGeneral]

sorry if im being too much of a burden but for the pcb can i connect a fuel gauge assembly for a fuel gauge or do i just have to buy the pdb with it already installed?